Datasheet

3SB3 Pushbuttons and Indicator Lights, 22 mm
Inscriptions
Insert labels
13/72
Siemens IC 10 · 2012
13
■ Options
Customized inscriptions
The labels can be inscribed with text and symbols not listed in
the ordering data.
By default, a letter height of 4 mm (for a single line of text) or
3 mm (for 2 or 3 lines of text) is used for text inscriptions.
The typeface used is Arial. Other letter heights and typefaces
are possible, but must be specified when ordering.
For round insert labels, the maximum possible number of char-
acters per line is:
• 10 characters for one line of text
• 8 characters for 2 lines of text
• 6 characters for 3 lines of text, but 10 characters in the middle
line
On square insert labels, 10 characters are possible per line.
Examples for customized inscription
Two-line inscription in upper/lower case lettering (K0Y)
Single-line inscription in upper case lettering (K1Y)
Three-line inscription in lower case letters (K2Y)
Symbol number 5011 according to IEC 60147 (K3Y)
Any symbol according to order form supplement (K9Y)
Ordering notes
Append the following codes to the Order No.:
• Text line(s) in upper/lower case, upper case always for begin-
ning of line (e.g. "Lift off"): K0Y
• Text line(s) in upper case (e.g. "LIFT OFF"): K1Y
• Text line(s) in lower case (e.g. "lift off"): K2Y
• Text line(s) in upper/lower case, all words begin with upper
case letters (e.g. "Lift Off"): K5Y
• Symbol with number according to ISO 7000 or IEC 60417:
K3Y
• Any inscription or symbol according to order form supple-
ment: K9Y
When ordering, specify the required inscription in plain text in
addition to the order number and order code. In the case of spe-
cial inscriptions with words in languages other than German,
give the exact spelling and specify the language.
In the case of multi-line inscriptions, the text must be assigned
to the respective line, e.g. "Z1 = Lift, Z2 =Lower". For long words
you can also specify the end-of-line division (see ordering exam-
ple 1).
Symbols can also be ordered with numbers according to
ISO 7000 or IEC 60417 (see ordering examples 2 and 3).
For special symbols (order code K9Y), a CAD drawing in
DXF format should be submitted to:
[e-mail]
Ordering example 1
A label with 2 lines of text is required:
3SB19 01–4AZ
K1Y
Z1 = LIFT
Z2 = LOWER
Ordering example 2
A label inscribed with symbol No. 5011 according to IEC 60417
is required:
3SB19 01–4AZ
K3Y
Z = 5011 IEC
Ordering example 3
A label inscribed with symbol No. 1118 according to ISO 7000 is
required:
3SB19 01–4AZ
K3Y
Z = 1118 ISO
Lift
Off
LIFT
lift
off
down
IC10_13.book Seite 72 Donnerstag, 19. Januar 2012 2:24 14
© Siemens AG 2012