Datasheet

3SB3 Pushbuttons and Indicator Lights, 22 mm
Inscriptions
13/77
Siemens IC 10 · 2012
Name plates
13
■ Options
Customized inscriptions
The labels can be inscribed with text and symbols not listed in
the ordering data.
The following letter heights are used as standard for text inscrip-
tions:
• Label size 12.5 mm × 27 mm: maximum 3 lines with letter
height 4 mm (1-line), 3.5 mm (2-line) or 2.5 mm (3-line)
• Label size 27 mm × 27 mm: maximum 5 lines with letter height
4 mm (1- to 5-line)
• Label size 17.5 mm × 28 mm: maximum 3 lines with letter
height 4 mm (1- and 2-line) or 3 mm (3-line)
Up to 11 characters per line are possible. The typeface used is
Arial. Other letter heights and typefaces are possible, but must
be specified when ordering.
Examples for customized inscription
Two-line inscription in upper/lower case lettering (K0Y)
Single-line inscription in upper case lettering (K1Y)
Three-line inscription in lower case lettering (K2Y)
Symbol number 5011 according to IEC 60417 (K3Y)
Any symbol according to order form supplement (K9Y)
Ordering notes
Append the following codes to the Order No.:
• Text line(s) in upper/lower case, upper case always for begin-
ning of line (e.g. "Lift off"): K0Y
• Text line(s) in upper case (e.g. "LIFT OFF"): K1Y
• Text line(s) in lower case (e.g. "lift off"): K2Y
• Text line(s) in upper/lower case, all words begin with upper
case letters (e.g. "Lift Off"): K5Y
• Symbol with number according to ISO 7000 or IEC 60417:
K3Y
• Any inscription or symbol according to order form supple-
ment: K9Y
When ordering, specify the required inscription in plain text in
addition to the order number and order code. In the case of spe-
cial inscriptions with words in languages other than German,
give the exact spelling and specify the language.
In the case of multi-line inscriptions, the text must be assigned
to the respective line, e.g. "Z1 = Lift, Z2 =Lower". For long words
you can also specify the end-of-line division (see ordering exam-
ple 1).
Symbols can also be ordered with numbers according to
ISO 7000 or IEC 60417 (see ordering examples 2 and 3).
For special symbols (order code K9Y), a CAD drawing in
DXF format should be submitted to:
[e-mail]
Ordering example 1
A label with 2 lines of text is required:
3SB39 02–1XZ
K1Y
Z1 = LIFT
Z2 = LOWER
Ordering example 2
A label inscribed with symbol No. 5011 according to IEC 60417
is required:
3SB39 02–1XZ
K3Y
Z = 5011 IEC
Ordering example 3
A label inscribed with symbol No. 1118 according to ISO 7000 is
required:
3SB39 02–1XZ
K3Y
Z = 1118 ISO
IC10_13.book Seite 77 Donnerstag, 19. Januar 2012 2:24 14
© Siemens AG 2012