Data Sheet

Electrical endurance (switching cycles) with contactor
3RH11, 3RT1016, 3RT1017, 3RT1024, 3RT1025,
3RT1026 typical
10000000
Electrical operating cycles in one hour with contactor
3RH11, 3RT1016, 3RT1017, 3RT1024, 3RT1025,
3RT1026
6000
Thermal current 10A
Reference code acc. to DIN EN 81346-2 B
Reference code acc. to DIN EN 61346-2 B
Continuous current of the C characteristic MCB 1A; for a short-circuit current smaller than 400 A
Continuous current of the quick DIAZED fuse link 10A; for a short-circuit current smaller than 400 A
Continuous current of the DIAZED fuse link gG 6A
Active principle mechanical
Repeat accuracy 0.05mm
Minimum actuating force in activation direction 20N
Length of the sensor 141.5mm
Width of the sensor 40mm
Design of the switching contact mechanical
Operating frequency rated value 50...60Hz
Number of NC contacts for auxiliary contacts 1
Number of NO contacts for auxiliary contacts 1
Number of CO contacts for auxiliary contacts 1
Operating current at AC-15
● at 24 V rated value
6A
● at 125 V rated value
6A
● at 240 V rated value
6A
Operating current at DC-13
● at 24 V rated value
3A
● at 125 V rated value
0.55A
● at 250 V rated value
0.27A
Design of the interface for safety-related
communication
without
Enclosure
Design of the housing block, narrow
Material of the enclosure metal
Coating of the enclosure cathodic immersion coating
Design of the housing acc. to standard Yes
Drive Head
Design of the operating mechanism Other, without, basic switch with plug
Design of the switching function Positive opening with appropriate positive opening actuator head
Circuit principle snap-action contacts
Number of switching contacts safety-related 1
Connections/ Terminals
3SE5115-0CA00-1AD0 Subject to change without notice
Page 2/
6
09/13/2019 © Copyright Siemens