User Manual
AS-Interface
9.5 Mounting
SIRIUS ACT 3SU1 pushbuttons and signaling devices
178 System Manual, 02/2015, A5E03457306020A/RS-AB/002
Procedure
①
Hold the EMERGENCY STOP backing plate onto the front plate.
②
Insert the EMERGENCY STOP mushroom pushbutton from the front through the
opening of the EMERGENCY STOP backing plate and the front plate.
③
Fit the holder from behind. Ensure secure latching
here.
④
Tighten the screw on the holder (tightening torque 1.0 to 1.2 Nm).
⑤
/ ⑥
Snap the AS
-i module for front plate mounting onto the back of the actuating ele-
ment.
Ensure the AS-i module for front plate mounting is securely snapped into place.