Information

13/120
Siemens IC 10 · 2018
SIRIUS ACT Pushbuttons and Indicator Lights
Accessories
Labels
Labeling plates
13
■ Options
Customized inscriptions
The labels can be inscribed with text and symbols not listed in
the ordering data.
Text inscriptions have centered alignment and the font heights
specified below as standard:
• Label size 12.5 mm × 27 mm, max. 3 lines:
Font height 4 mm (1-line), 3.5 mm (2-line) or
2.5 mm (3-line)
• Label size 17.5 mm × 27 mm, max. 3 lines:
Font height 4 mm (1- to 2-line) or 3 mm (3-line)
• Label size 27 mm × 27 mm, max. 5 lines:
Font height 4 mm (1- to 5-line)
Up to 11 characters per line are possible. The typeface used is
Arial. Other letter heights and typefaces are possible, but must
be specified when ordering.
Examples for customized inscription
Two-line inscription in upper/lower case lettering (Q0Y)
Single-line inscription in upper case lettering (Q1Y)
Three-line inscription in lower case letters (Q2Y)
Symbol number 5011 according to IEC 60417 (Q3Y)
Any symbol according to order form supplement (Q9Y)
Ordering notes
Append the following order codes to the article number:
• Q0Y: Text line(s) in upper/lower case, all lines begin with
upper case letters (e.g. line 1: Lift/line 2: Off)
• Q1Y: Text line(s) in upper case (e.g. LIFT)
• Q2Y: Text line(s) in lower case (e.g. lift/off/lower)
• Q5Y: Text line(s) in upper/lower case, all words begin with
upper case letters (e.g. On Off)
• Q3Y: Symbol with number according to ISO 7000 or
IEC 60417
• Q9Y: Inscription of choice, text or symbol, can only be ordered
via SIRIUS ACT Configurator with a Configuration Identifica-
tion Number (CIN)
When ordering, specify the required inscription in plain text with-
out spaces, in addition to the article number and order code. In
the case of special inscriptions with words in languages other
than German, give the exact spelling and specify the language.
In the case of multi-line inscriptions, the text must be assigned
to the respective line, e.g. Z1=Lift, Z2=Lower
(see ordering example 1).
Symbols can also be ordered with numbers according to
ISO 7000 or IEC 60417 (see ordering examples 2 and 3).
The SIRIUS ACT Configurator must be used to select special
inscriptions and symbols (order code Q9Y). In this case a CIN
(Configuration Identification Number) is generated for place-
ment of future orders. It is then possible to place an order directly
using the CIN and the SIRIUS ACT Configurator (Mall shopping
cart) or via the standard ordering channels.
Standard ordering channels:
• Configurator: www.siemens.com/sirius-act/configurator
• Electronic Catalog CA 01 on DVD
• Industry Mall: www.siemens.com/industrymall
Ordering example 1
A label with 2 lines of text is required:
3SU1900–0AC16-0AZ0
Q1Y
Z1=LIFT
Z2=LOWER
Ordering example 2
A label inscribed with symbol No. 5011 according to IEC 60417
is required:
3SU1900–0AC16-0AZ0
Q3Y
Z=5011 IEC
Ordering example 3
A label inscribed with symbol No. 1118 according to ISO 7000 is
required:
3SU1900–0AC16-0AZ0
Q3Y
Z=1118 ISO
© Siemens AG 2017