User Manual
3SU10 device range
4.2 Overview
SIRIUS ACT 3SU1 pushbuttons and signaling devices
70 System Manual, 02/2015, A5E03457306020A/RS-AB/002
4.2.2.10
30.5 mm selector switches
The selector switch is an actuator with 2 or 3 switch positions. Thanks to the rotary actuation,
up to 3 contact modules can be operated with momentary contact or latching operation. The
fiber-optic conductor integrated into the actuator can be illuminated using an LED module.
Selector switches in the 30.5 mm size are intended for flat mounting. The series is available
in metal and metal matte versions.
Selector switches are available in different variants according to the following features:
● Actuators (short / long selector)
● Switch positions
● Collar and front ring material
● Color of actuators
● Switching functions: latching / momentary contact
● Can be illuminated
Note about installation:
The metal holder (3SU1550-0AA10-0AA0) must be used when mounting.
In addition, the adapter for actuators and indicators for flat mounting must be mounted
between the front plate and the holder. This is included in the scope of supply, but can also
be ordered as a separate item (3SU1950-0KJ80-0AA0).
The pressure plates (standard scope of supply) must be removed before the LED module is
installed.
Selector switches with short selector
Typical diagram
2 switch positions
Latching, 90°
(10:30/1:30 o'clock)
Momentary contact 45° (10:30/12
o'clock),
reset from center to left
Collar / Front ring material
Article number
Metal / Metal, matte 3SU106
(http://mall.industry.siemens.com/mall/en/en/Catalog/Products/10226912)
• Red
3SU1062-2DF20-0AA0 3SU1062-2DC20-0AA0
• Green
3SU1062-2DF40-0AA0 3SU1062-2DC40-0AA0
• Black / White
3SU1062-2DF60-0AA0 3SU1062-2DC60-0AA0