User Manual

3SU10 device range
4.2 Overview
SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 02/2015, A5E03457306020A/RS-AB/002
43
Procedure
1. Attach the holder (b) to the actuating element from behind.
2. Tighten the holder screw (c).
3. Secure the grounding cable (a) with ring cable lugs to the grounding stud (3SU1950-
0KK80-0AA0), tightening torque: 0.8 - 1.0 Nm.
Module slot position
The holders are available in metal or plastic versions with 3 slot positions for contact or LED
modules.
The module slot positions (contact or LED modules) are indicated on top of the holder. The
large digits designate the modules that are snapped directly onto the holder. The small digits
indicate the position of stacked modules.
Figure 4-1 Marking of slot positions
on the 3-slot holder