User Manual
3SU10 device range
4.3 Mounting
SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 02/2015, A5E03457306020A/RS-AB/002
95
4.3.5
Installation sequence ID key-operated switch
Procedure
①
Insert the ID key
-operated switch from the front into the opening of the front plate.
②
Place the holder from behind onto the ID key
-operated switch.
③
Tighten the screw on the holder (tightening torque 1.0
to 1.2 Nm).
④
Snap the electronic module onto the back of the holder.
Fit the narrow snap hook into the associated contours on the holder.
⑤
Engage the broad snap hook into the associated contour on the holder.
Ensure secure latching