Datasheet

● Voltage window recognition DC
Yes
● Overvoltage detection 1 phase
Yes
● Overvoltage detection 3 phase
No
● Overvoltage detection DC
Yes
● undervoltage detection 1 phase
Yes
● undervoltage detection 3 phases
No
● undervoltage detection DC
Yes
● External reset
Yes
● Auto-reset
Yes
● Adjustable open/closed-circuit current principle
Yes
Startup time after the control supply voltage has been
applied
ms 1000
Type of voltage of the control supply voltage AC/DC
Control supply voltage
● at AC
— at 50 Hz rated value
V 24...24
— at 60 Hz rated value
V 24...24
● at DC rated value
V 24...24
Operating range factor control supply voltage rated
value
● at AC
— at 50 Hz
0.85...1.15
— at 60 Hz
0.85...1.15
● at DC
0.85...1.15
Surge voltage resistance rated value kV 4
Active power consumption W 2
Protection class IP IP20
Electromagnetic compatibility IEC 60947-1 / IEC 61000-6-2 / IEC 61000-6-4
Vibration resistance acc. to IEC 60068-2-6 1 ... 6 Hz: 15 mm, 6 ... 500 Hz: 2g
Shock resistance acc. to IEC 60068-2-27 sinusoidal half-wave 15g / 11 ms
Installation altitude at height above sea level
maximum
m 2000
maximum permissible voltage for safe isolation
● between control and auxiliary circuit
V 300
● between auxiliary and auxiliary circuit
V 300
Conducted interference due to burst acc. to IEC
61000-4-4
2 kV
Conducted interference due to conductor-earth surge
acc. to IEC 61000-4-5
2 kV
Conducted interference due to conductor-conductor
surge acc. to IEC 61000-4-5
1 kV
Electrostatic discharge acc. to IEC 61000-4-2 6 kV contact discharge / 8 kV air discharge
Field-bound parasitic coupling acc. to IEC 61000-4-3 10 V/m
3UG4632-1AA30 Changes preserved
Page 2/
5
17.12.2015 © Copyright Siemens AG