System Manual
Table Of Contents
- SIMATIC RTLS Hardware
- Legal information - Warning notice system
- Table of contents
- 1 Introduction
- 2 Safety notices
- 3 System overview
- 4 Planning an RTLS system
- 5 Anchors
- 5.1 SIMATIC RTLS4030A
- 5.2 SIMATIC RTLS4330A
- 5.3 SIMATIC RTLS4420A
- 5.4 SIMATIC RTLS4430A
- 6 Gateways
- 6.1 SIMATIC RTLS4030G
- 6.2 SIMATIC RTLS4330G
- 6.3 SIMATIC RTLS4420G
- 6.4 SIMATIC RTLS4430G
- 7 Transponder
- 7.1 SIMATIC RTLS4030T
- 7.2 SIMATIC RTLS4060T
- 7.3 SIMATIC RTLS4083T
- 7.4 SIMATIC RTLS4084T
- 7.5 SIMATIC RTLS4460T
- 7.6 SIMATIC RTLS PCB OEM AC
- 7.7 SIMATIC RTLS PCB OEM AX
- 7.8 SIMATIC RTLS PCB OEM CHIRP
- 7.9 SIMATIC RTLS PCB OEM PULSE
LED Meaning
LAN/SERVER LED
Flashes blue once per second when the device is connected to the network but
there is no connection to the RTLS localization server
LAN/SERVER LED
Is off when the device is not connected to the network
6.4.1.5 Dimension drawing
3:5
5$',2
6,0$7,&
57/6*
/$1
6(59(5
Figure 6-9 Dimension drawing SIMATIC RTLS4430G - All dimensions specified in millimeters
6.4.1.6 Troubleshooting
Error detection Cause of the error Troubleshooting
Device does not respond, all LEDs are
off
The device is not connected or the pow‐
er supply unit is not switched on.
Check the supply voltage of the device.
The red LED (POWER) flashes once
per second.
Undervoltage on the device Check the supply voltage of the device.
Gateways
6.4 SIMATIC RTLS4430G
System Manual, 04/2019, C79000-G8976-C577-01 113