System Manual
Table Of Contents
- SIMATIC RTLS Hardware
- Legal information - Warning notice system
- Table of contents
- 1 Introduction
- 2 Safety notices
- 3 System overview
- 4 Planning an RTLS system
- 5 Anchors
- 5.1 SIMATIC RTLS4030A
- 5.2 SIMATIC RTLS4330A
- 5.3 SIMATIC RTLS4420A
- 5.4 SIMATIC RTLS4430A
- 6 Gateways
- 6.1 SIMATIC RTLS4030G
- 6.2 SIMATIC RTLS4330G
- 6.3 SIMATIC RTLS4420G
- 6.4 SIMATIC RTLS4430G
- 7 Transponder
- 7.1 SIMATIC RTLS4030T
- 7.2 SIMATIC RTLS4060T
- 7.3 SIMATIC RTLS4083T
- 7.4 SIMATIC RTLS4084T
- 7.5 SIMATIC RTLS4460T
- 7.6 SIMATIC RTLS PCB OEM AC
- 7.7 SIMATIC RTLS PCB OEM AX
- 7.8 SIMATIC RTLS PCB OEM CHIRP
- 7.9 SIMATIC RTLS PCB OEM PULSE
7.1.4.1 UL
UL HAZ. LOC.
The SIMATIC Ident products meet the requirements of explosion protection according to UL
HAZ. LOC. The products meet the requirements of the following standards:
Document Title
UL 60079-0 Hazardous areas
Part 0: Equipment - General requirements
CSA C22.2 NO. 60079-0
UL 60079-7 Hazardous areas
Part 7: Equipment protection by increased safety "e"
CSA C22.2 NO. 60079-7
UL 60079-31 Hazardous areas
Part 31: Equipment dust ignition protection by enclosure "t"
CSA C22.2 NO. 60079-31
You will find the current versions of the standards in the currently valid UL HAZ. LOC.
certificates.
UL HAZ. LOC. identifier
NOTICE
Validity only when the devices are labeled
Only devices with the UL HAZ. LOC. mark have the corresponding approval.
The labeling of electrical equipment is as follows:
LISTED E223122
IND.CONT.EQ FOR HAZ.LOC.
CL.I, DIV.2, GP.C,D T4
CL.II, DIV.2, GP.F,G T80 °C
AEx ec IIB T4 Gc, Ex ec IIB T4 Gc X
AEx tc IIIC TXX °C Dc, Ex tc IIIC TXX °C Dc X
-10 °C < Tamb. < +50 °C
IP54
U
n
= XX V DC, XX mA
The equipment also carries the following notes:
XXXYYYZZZ [= serial number, is assigned during production]
Transponder
7.1 SIMATIC RTLS4030T
132 System Manual, 04/2019, C79000-G8976-C577-01