System Manual

6GT2700-6CE02
Input impedance 4.7 kOhm
Input 8, 4.7 kOhm or 110 kOhm can be selected
Digital output High-side switch → Connect to input voltage
Output current Max. 250 mA, short-circuit proof
Output voltage 0 V or supply voltage
Load Any; inductive loads up to 32 H do not require a freewheeling
diode. If a freewheeling diode is used, a polarity protection
diode must also be used.
Permitted ambient conditions
Ambient temperature -40 ... +70 °C
Design, dimensions, weights and connectors
Dimensions (L x W x H) 138 x 62 x 31 mm
Weight 125 g
Degree of protection IP20
Enclosure Plastic housing
Color Gray
Method of securing 4 mounting holes for M4 countersunk head screws
Power plug (P1) 16-pin plug-in connector WR-MPC4, 0.33 mm² open 1.31 mm²
Antenna connector RP-SMA power plug
Fuses Mini blade-type fuse, 2 A
7.5.4 Approvals
You can find the current EU Declaration of Conformity for these products on the Internet at
Siemens Industry Online Support.
Link: (https://support.industry.siemens.com/cs/products?
dtp=Certificate&mfn=ps&pnid=14970&lc=en-US)
The products described in this document meet the requirements of the following EU directives:
● RoHS Directive 2011/65/EU
Directive of the European Parliament and of the Council of 8 June 2011 on the restriction of
the use of certain hazardous substances in electrical and electronic equipment, official
journal of the EU L174, 1 July 2011, pages 88-110
● Radio Equipment Directive 2014/53/EU (RED)
Directive of the European Parliament and of the Council of 16 April 2014 on the
harmonization of the laws of the member states relating to placing radio equipment on the
market; official journal of the EU L153, 22 May 2014, pages 62-106
Transponder
7.5 SIMATIC RTLS4460T
164 System Manual, 04/2019, C79000-G8976-C577-01