System Manual
Table Of Contents
- SIMATIC RTLS Hardware
- Legal information - Warning notice system
- Table of contents
- 1 Introduction
- 2 Safety notices
- 3 System overview
- 4 Planning an RTLS system
- 5 Anchors
- 5.1 SIMATIC RTLS4030A
- 5.2 SIMATIC RTLS4330A
- 5.3 SIMATIC RTLS4420A
- 5.4 SIMATIC RTLS4430A
- 6 Gateways
- 6.1 SIMATIC RTLS4030G
- 6.2 SIMATIC RTLS4330G
- 6.3 SIMATIC RTLS4420G
- 6.4 SIMATIC RTLS4430G
- 7 Transponder
- 7.1 SIMATIC RTLS4030T
- 7.2 SIMATIC RTLS4060T
- 7.3 SIMATIC RTLS4083T
- 7.4 SIMATIC RTLS4084T
- 7.5 SIMATIC RTLS4460T
- 7.6 SIMATIC RTLS PCB OEM AC
- 7.7 SIMATIC RTLS PCB OEM AX
- 7.8 SIMATIC RTLS PCB OEM CHIRP
- 7.9 SIMATIC RTLS PCB OEM PULSE
Pin Description
N Mains supply (red)
8 ... 30 V DC
L Grounding terminal (black)
GND (0 V)
I Digital output (brown)
Switched input voltage, max. current 200 mA
5.2.1.4 LED status indicator
The operating states of the anchor are indicated by the LEDs. The states can be off , on and
flashing .
LED Meaning
RUN LED
Lights up green when power is supplied to the device through the mains cable
RUN LED
Flashes once per second when there is an undervoltage at the device
RADIO LED
Is off when the radio signal of the device to the RTLS localization system of the
device is inactive
RADIO LED
Flashes yellow when the radio signal of the device to the RTLS localization system
is active
SERVER LED
Lights up blue when the device is connected to the local network
Anchors
5.2 SIMATIC RTLS4330A
34 System Manual, 04/2019, C79000-G8976-C577-01