System Manual
Table Of Contents
- SIMATIC RTLS Hardware
- Legal information - Warning notice system
- Table of contents
- 1 Introduction
- 2 Safety notices
- 3 System overview
- 4 Planning an RTLS system
- 5 Anchors
- 5.1 SIMATIC RTLS4030A
- 5.2 SIMATIC RTLS4330A
- 5.3 SIMATIC RTLS4420A
- 5.4 SIMATIC RTLS4430A
- 6 Gateways
- 6.1 SIMATIC RTLS4030G
- 6.2 SIMATIC RTLS4330G
- 6.3 SIMATIC RTLS4420G
- 6.4 SIMATIC RTLS4430G
- 7 Transponder
- 7.1 SIMATIC RTLS4030T
- 7.2 SIMATIC RTLS4060T
- 7.3 SIMATIC RTLS4083T
- 7.4 SIMATIC RTLS4084T
- 7.5 SIMATIC RTLS4460T
- 7.6 SIMATIC RTLS PCB OEM AC
- 7.7 SIMATIC RTLS PCB OEM AX
- 7.8 SIMATIC RTLS PCB OEM CHIRP
- 7.9 SIMATIC RTLS PCB OEM PULSE
Output voltage: 0 (switched off) or input voltage (switched on)
Maximum output current: 100 mA
P2 - Antenna - RP-SMA connection
Pin Description
1 Antenna
Shielding GND, shielding
5.3.1.4 LED status indicator
The operating states of the anchor are indicated by the LEDs. The states can be off , on and
flashing .
RADIO LED (D1) Meaning
Is off when the device is inactive
Flashes regularly in yellow when an error is indicated
Flashes yellow when the radio signal of the device to the RTLS localization system
is active
Anchors
5.3 SIMATIC RTLS4420A
System Manual, 04/2019, C79000-G8976-C577-01 47