BACnet PTEC Controllers Configuration and Sizing Guidelines Building Technologies 140-0986 2015-07-06 Restricted
Ordering Equipment Controllers Ordering Smoke Control Legend All products have been evaluated for use on a smoke control network. Use the information below to determine if a product can be used for smoke control. Code Smoke Control Status S1 Can be used for smoke control. S2 Can be connected to a smoke control network but may not perform any smoke control functions. S3 Cannot be connected to a smoke control network. S4 Does not affect a smoke control network.
Ordering Equipment Controllers Equipment Controller Ordering.
Ordering Equipment Controllers BACnet Equipment Controller Applications.
Ordering Equipment Controllers BACnet Equipment Controller Applications.
Ordering Accessories Accessories Equipment Controller Accessories. Product Product Number Description Autozero Module 540-380 Autozero Module with bracket. S4 Relay Module 540-147 Four high-voltage (240 Vac, 1.2 amp max.) relays for electronic controllers. S2 TEC Plug-in Relay Module 550-054 Short Platform Controller – 6 DO, 16 position terminal block with 4 relays, single unit Short Platform Controller – 6 DO, 16 position terminal block with 4 relays, 10 pack.
Ordering Cables and Accessories * QPA sensors require AQM2200 power supply. 1) See the Smoke Control Legend for more information. 2) M = Manufacturer Installed, F = Field Installed. 3) Autozero modules are required and must be used in situations where the space is occupied 24 hours a day, such as hospital isolation rooms, animal holding rooms, and lab areas. Cables and Accessories Terminal Equipment Controller Room Sensor Cables.
Ordering Terminal Blocks Terminal Blocks Removable Terminal Block Replacement Kits. Product Product Number Description TEC 3 POS Power Terminal Block 550-799P TEC Power Terminal Block Replacement Kit (ten 3position per kit “C-H-E”). S4 BACnet ATEC Terminal Block 550-799R Point Termination Block Replacement Kit. S4 TEC Point Termination Blocks 540-496 Point Termination Block Replacement Kit (two 16postion and two 12-position per kit).
Issued by Siemens Industry, Inc. Building Technologies Division 1000 Deerfield Pkwy Buffalo Grove IL 60089 Tel. +1 847-215-1000 Document ID 140-0986 Edition 2015-07-06 © Siemens Industry, Inc., 2015 Technical specifications and availability subject to change without notice.