Installation Instructions

Installation Instructions
Document No. 550-129
October 21, 2011
Smoke Control BACnet PTEC Constant
Volume Controller
Item No. 550-129. Rev. AA Page 1 of 5
24 V-AC
RX
TX
BST
RTS
DO 1
NO C
DO 2
NO C
DO 3
NO C
DO 4
NO C
DO 5
NO C
DO 6
NO C
+ -+ -+ -
+ -
AI 3
+ -
AI 4
+ -
AO 3AO 2AO 1DI 6DI 2AI 5DO 8
NO C
DO 7
NO C
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 161 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
C H GND
TEC0559R1
CONTROLLER
BOARD
MOUNTING
HOLE
(2)
MOUNTING
RAIL
POWER
TRUNK
TERMINATIONS
INPUT / OUTPUT TERMINATIONS
DO LEDS
RECEIVE LED, TRANSMIT LED, AND BST LED
FLN TRUNK
TERMINATIONS
ROOM TEMPERATURE
SENSOR / MMI PORT
COVER
1 2 3 4 5 6 7 8 9 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 1 11 12 13 14 15 166
+
-
FLN TRUNK
0
+-
AIR VELOCITY
SENSOR PORTS
Siemens BACnet PTEC Constant Volume Controller.
Control Applications
6560, 6562, 6563
Product Description
These instructions explain how to field install or
replace a Siemens BACnet PTEC Constant Volume
Controller.
Product Numbers
Smoke Control Listed Siemens
BACnet PTEC Constant Volume
Controller
550-498PK
Shipping cartons includes a controller assembly, a
mounting rail, and two self-tapping/drilling screws.
CAUTION
Keep the unit in its static-proof bag
until installation.
Otherwise you run the risk of
damage to the PCA from
electrostatic discharge.
Warning/Caution Notation
WARNING
Personal injury/loss of life may
occur if you do not follow the
procedures as specified.
CAUTION
Equipment damage or loss of data
may occur if you do not follow the
procedures as specified.
Accessories
Low cost temporary temperature
sensor that enables space control
if the permanent room or duct
sensor is not installed.
540-658P25