Data Sheet for Product

Siemens Industry, Inc.
Page 3 of 4
Specifications
General Specifications (FLNX and FPX)
Frequency
16 selectable channels of operation in the 2.4 GHz international license free ISM band
(IEEE 802.15.4 radio channels 11 through 26)
2405 to 2480 MHz - 5 MHz channel spacing
Channels are factory set to IEEE 802.15.4 Channel 26 (2480 MHz)
Modulation
O-QPSK Direct Sequence Spread Spectrum radio in accordance with the IEEE 802.15.4
specification
Agency Listings
UL 916
CSA
Complies with FCC Part 15 Regulations (Low Power Unlicensed Transmitters)
Certification
Designed for ZigBee
®
Range
Outdoor line of sight range of 350 ft (107 m)
Typical indoor range of 25 to 100 ft (8 to 30 m)
(actual range varies based on environmental conditions)
Operating
Temperature
32 to 122F (0 to 50C)
Operating Relative
Humidity
20% to 90% relative humidity (non-condensing)
Dimensions
L 4.5" × W 3.5" × D 1.35"
(114 mm × 89 mm × 34 mm)
Antenna
6” (15 cm) beyond radio enclosure
Power:
Voltage
Requirement
24 Vac @ 50/60 Hz (19 to 32 Vac)
Power
Consumption
1.2 VA (Nominal) at 24 Vac
System Specifications
Maximum number
of FLN devices
32 devices (either hard-wired or wireless) total per field panel FLN port
Compatibility:
Automation Level
PXC Modular Series Controller with Expansion Module – for P2 or BACnet ALN
PXC Compact Series Controller with FLN – for P2 or BACnet ALN
Series 1000 Modular Equipment Controller (MEC) with FLNs, 32 MB or greater RAM, and
Firmware Revision 2.8 – for P2 ALN
Modular Building Controller (MBC) with PowerPC and Firmware Revision 2.8 – for P2 ALN
Field Level
Terminal Equipment Controller (TEC) using P1 protocol
Point Pickup Module (PPM) using P1 protocol
Point Expansion Modules
Digital Energy Monitor
Variable Speed Drives
Other third-party FLN devices (using P1 protocol)