Assortment / System Description
Pneumatic Controllers and Transmitters 
Powers® Controls 195 Single Input Receiver-Controller 
The RC 195 Single Input Receiver-Controller is a pneumatic instrument which receives one 
pneumatic input, either direct acting (DA) or reverse acting (RA). It produces a pneumatic 
control signal based on the net pneumatic input and the mechanical settings of the setpoint 
and percent proportional band.  
Part Number: 195-0011 
Technical Instructions 
Installation Instructions 
Powers® Controls 195 Multiple Input Receiver-Controller 
The Powers® 195 Multiple Input Receiver-Controller is a pneumatic controller that receives 
up to three pneumatic inputs and produces a pneumatic output signal based on the net 
pneumatic input and the setpoint, percent proportional band, and authority settings. The 
controller can be easily changed from direct to reverse acting. 
Part Numbers: 195-0001, 195-0003 
Technical Instructions 
Installation Instructions 
Powers® 184 Temperature Transmitters 
The Powers® 184 Temperature Transmitters are direct acting, one-pipe instruments that 
sense temperature and transmit a proportional 3 to 15 psi (21 to 103 kPa) pneumatic 
signal to a remotely located receiver gauge and/or receiver controller. Temperature 
Transmitters operate on the force-balance principle, using internal feedback for excellent 
linearity and accuracy. 
Part Numbers: 184-0001, 184-0002, 184-0003, 184-0004, 184-0005, 184-0006, 184-
0014, 184-0015, 184-0018, 184-0028, 184-0034, 184-0036, 184-0041, 184-0048, 184-
0121, 
184-0122, 184-0123, 184-0124, 184-0125, 184-0129, 184-0340 
Technical Instructions 
Installation Instructions 
HT 186 Humidity Transmitter 
The HT 186 Humidity Transmitter is a one-pipe, pneumatic instrument. It senses space 
humidity and transmits a proportional 3 to 15 psi (20.7 to 103 kPa) output pressure signal 
to a remote receiver gauge calibrated to read percent relative humidity. The transmitter 
output may also be sent to a receiver-controller for further control of an air conditioning or 
process control system. 
Part Numbers: 186-0043, 186-0089 
Technical Instructions 










