Data Sheet for Product

ManualsBrandsSiemens ManualsAir conditioning controllerPowers Controls CP 567 Control Cabinets Technical Instructions

POWERS™ CONTROLS

Technical Instructions

Document No. 155-272P25

CP 567-7

October 12, 2017

CP 567 Control Cabinets

Siemens Industry, Inc.

Description

CP 567 Control Cabinets are designed to conveniently group control system components (see

Figure 1). Control components can be mounted on the door or mounted within the cabinet

enclosure using the perforated mounting plate. Cabinets are available in five sizes: 0, 1, 2, 3, and

4. See Table 1 for product numbers and dimensions.

• The enclosure, door, and mounting plate for Sizes 1, 3 and 4 may be ordered separately.

• The Size 1 cabinet enclosure is available in a flush mount version.

• Size 3 and 4 cabinets are available in 6-inch depth (for electronic installations) or

9-inch depth (for pneumatic installations).

• Size 0 cabinets have permanently mounted door hinge and have windowed door option.

These sizes are only available as complete cabinet assemblies.

Variations

567-452

567-551

567-556 Mounting Plate in Cabinet

Figure 1. CP 567 Control Cabinet Assembly Examples

Table 1. Product Numbers.

Description Product

Numbers

Dimensions

Inches (mm)

H × W × D

Size Installation

Complete Cabinet Assemblies

(Cabinet Assembly includes cabinet box-enclosure, blank door, perforated mounting panel, keylock, and label for optional application.)

Cabinet Assembly with

“Blank” Door

0 Electronic 567-551 12 (305) ×14 (356) × 3-1/2 (89)

1 Pneumatic 567-351 19-1/2 (495) × 16-3/8 (416) × 5-3/4 (146)

2 Electronic 567-454 20 (508) × 20 (508) × 6 (152)

3 Pneumatic 567-352 24-5/16 (617) × 24-3/8 (619) × 9-3/8 (238)

3 Electronic 567-452 24-5/16 (617) × 24-3/8 (619) × 6 (152)

4 Pneumatic 567-353 36-1/2 (927) × 24-3/8 (619) × 9-3/8 (238)

4 Electronic 567-453 36-1/2 (927) × 24-3/8 (619) × 6 (152)

Cabinet Assembly with

polycarbonate “Window” in

the Door

0 Electronic 567-556 12 (305) × 14 (356) × 3-1/2 (89)

Summary of content (12 pages)

PAGE 1
Technical Instructions POWERS™ CONTROLS Document No. 155-272P25 CP 567-7 October 12, 2017 CP 567 Control Cabinets Description CP 567 Control Cabinets are designed to conveniently group control system components (see Figure 1). Control components can be mounted on the door or mounted within the cabinet enclosure using the perforated mounting plate. Cabinets are available in five sizes: 0, 1, 2, 3, and 4. See Table 1 for product numbers and dimensions.
PAGE 2
Technical Instructions Document Number 155-272P25 October 12, 2017 CP 567 Control Cabinets Table 2. Product Numbers (continued). Description Product Numbers Size Installation Dimensions Inches (mm) H×W×D Individual Cabinet Components for Rough-in and Staged Installation Cabinet Enclosure (Box) Only – for rough-in Cabinet Door Only Flush Mount Cabinet Flush Mount Door Kit Perforated Mounting Plates (NOTE: Mounting bolts and nuts included with enclosure (box.
PAGE 3
CP 567 Control Cabinets Specifications Technical Instructions Document Number 155-272P25 October 12, 2017 Cabinet Sizes Dimensions: Cabinet, Door, Subpanel Supports Mounting: Wall Floor Flush (in wall) Knockouts-Electrical Conduit Size: Size 0 Cabinets Top Bottom Right Side Left Side Size 1 and Flush Mount Cabinets Top Bottom Right Side Left Side Size 2, Size 3 and Size 4 Cabinets Top Bottom Right Side Left Side Siemens Industry, Inc. See Table 1.
PAGE 4
Technical Instructions Document Number 155-272P25 October 12, 2017 Accessories CP 567 Control Cabinets Replacement Door Lock and Key Assembly Floor Mount Support Kit (2 supports, hardware) Cabinet Light 567-225 See Table 2. See I.D. Number 3296 in the Field Purchasing Guide. Table 3. Floor Mount Support Kit.
PAGE 5
CP 567 Control Cabinets Door Layout Technical Instructions Document Number 155-272P25 October 12, 2017 NOTE: Controls cannot be mounted to the door of the flush mount cabinet. Perform the following steps when preparing to lay out a cabinet door: 1. Determine controls to be mounted on the door. 2. Determine if the controls mounted in the door will clear the mounting plate when tubing or wires are attached. See Figure 3 and Table 5 for dimensions.
PAGE 6
Technical Instructions Document Number 155-272P25 October 12, 2017 CP 567 Control Cabinets Controls Installation NOTE: It might be easier to remove the door from the cabinet and then mount the controls onto the door or the mounting plate. 1. The space required for the controls mounted in the door or the mounting plate is shown in Table 4. Space available between the door and the mounting plate is shown in Figure 4, Table 5, and Table 6. 2.
PAGE 7
CP 567 Control Cabinets Cabinet Installation (Flush Mount) Technical Instructions Document Number 155-272P25 October 12, 2017 1. Mount the cabinet in a wall at least 6 inches (15.2 cm) deep. There are four keyhole mounting holes in the back surface of the cabinet. Their sizes and locations are shown in Figure 5. Use wall anchors that are suitable to support the weight of the cabinet and its contents. 2.
PAGE 8
Technical Instructions Document Number 155-272P25 October 12, 2017 CP 567 Control Cabinets Table 5. Approximate Panel Space Requirements (Includes Fitting and Clearances). 6 Input Sig. Selector – Equipment Weight Pounds (kg) (See Note 3) – 656 Pilot Valve – – 3 (76) 100 (645) ARG61.00 Wall Mount Case – – 8.52 (216.4) 13.10 (84.5) ARG61.01 Panel Mount Case 7.52 (191) 1.65 (0.750) – 11.28 (72.8) D.P. Switch – – 3 (76) 45 (290) Diff. Press. Reg.
PAGE 9
CP 567 Control Cabinets Technical Instructions Document Number 155-272P25 October 12, 2017 Table 6. Usability.
PAGE 10
Technical Instructions Document Number 155-272P25 October 12, 2017 CP 567 Control Cabinets Dimensions, Continued Figure 5. Rear View of Cabinet (See Table 6). Table 7. Cabinet Assembly Dimensions (See Figures 4, 5, and 6). Cabinet Assembly Product Size Number A 16 (406) B 19 (483) C D 16-3/8 19-1/2 (416) (495) Dimensions Inches (mm) E F G 5-3/4 14-1/2 14-3/4 (146) (368) (375) H 5 (127) I 5-11/16 (145) J 1/2 (13) 6 (152) 15.
PAGE 11
CP 567 Control Cabinets Technical Instructions Document Number 155-272P25 October 12, 2017 Dimensions, Continued Figure 6. Floor Mount Support Legs Kit. Dimensions in Inches (mm). Siemens Industry, Inc.
PAGE 12
Technical Instructions Document Number 155-272P25 October 12, 2017 CP 567 Control Cabinets Dimensions, Continued Figure 7. Flush Mount Cabinet Dimensions (See Table 7). Table 8. Flush Mount Cabinet and Door Dimensions.