Data Sheet for Product

Technical Instructions CP 567 Control Cabinets
Document Number 155-272P25
October 12, 2017
Page 2 Siemens Industry, Inc.
Table 2. Product Numbers (continued).
Description Product
Numbers
Dimensions
Inches (mm)
H × W × D
Size Installation
Individual Cabinet Components for Rough-in and Staged Installation
Cabinet Enclosure (Box)
Only – for rough-in
1 Pneumatic 567-371 See Figures 4 and 5
3 Either 567-372 See Figures 4 and 5
4 Either 567-373
Cabinet Door Only 1 Pneumatic 567-361 See Figure 4
3 Either 567-362
4 Either 567-363
Flush Mount Cabinet 1 Pneumatic 567-391 See Figure 7
Flush Mount Door Kit 1 Pneumatic 567-390 See Figure 8
Perforated Mounting Plates
(NOTE: Mounting bolts and
nuts included with enclosure
(box.)
1 Pneumatic 567-381 –
3 Either 567-382
4 Either 567-383
Application
CP 567 Control Cabinets provide a convenient central location for equipment mounting,
termination of piping, adjustment, and calibration.
The door and mounting plate can be separated from the cabinet enclosure on Sizes 1, 3
and 4. The empty cabinet enclosure can be installed at the job site to permit early wiring
rough-in.
Controls may be mounted to the door and mounting plate either at the job site or at the
office, and attached to the cabinet enclosure at your convenience. After reassembly, final
connections are made.
Cabinets may be used with pneumatic systems employing either copper or polyethylene
tubing for transmission lines, with wired electric/electronic systems, or with a combination
of both. Cabinets with window in door may be used with controls having displays.
Pneumatic tubing within the cabinet enclosure should be polyethylene for a flexible
connection to hinged door components and for easy installation and arrangement.
Features
• Cabinets are symmetrical; therefore, they can be mounted with the door hinge on the
left or right hand side.
• Door is removable on Sizes 1, 3 and 4. Sizes 0 and 2 have a fixed hinge door.
• Attractive gray finish permits use in occupied areas.
• Removable perforated mounting plate permits mounting controls inside the cabinet
without drilling holes.
• All cabinets can be wall mounted. Knockouts are provided for wiring or piping.
• A windowed door version is available for controls having displays for external viewing.
• Support kits are available for floor mounting for cabinet Sizes 3 and 4.
• Cabinets are NEMA 1 rated, listed under UL 508 Industrial Control Panel Enclosures.
• CSA approved file LR84214.
• Height and width dimensions and cabinet color are the same for automation and
pneumatic cabinets for a uniform look and mounting.