User Guide

ManualsBrandsSiemens ManualsControl Valves1" 2-Way Sweat Zone Valve Body (7.0 Cv)

599 Series

Zone Valve Bodies:

Technical Instructions

Document No. 155-320P25

VE VV-1

February 6, 2006

Two-Way and Three-Way

Siemens Industry, Inc.

Description

The 599 Series two-way and three-way Zone Valves with a 1/10-inch

(2.5 mm) stroke.

Features

Direct-coupled, universal bonnet

Application

Control of hot or chilled water for:

Zones with radiators

Floor heating by manifolds

Fan coil units

Induction units

Cooling ceilings (zone valves)

Wall-mounted boilers (zone valves)

VAV applications

Ordering a

Valve

To order a valve from the factory, use the product part numbers in Table 1.

Specification

Line size 1/2 to 1-inch (15 to 25 mm)

Capacity See Tables 2 and 3 and Figure 2

Body style Globe

Seat style Metal-to-metal

Action Two-way: NO/NC determined by actuator

Three-way: Diverting

Mixing (limited application)

Valve body rating ANSI Class 125

Stem travel (Stroke) 1/10-inch (2.5 mm)

Material

Body Brass

Body trim Brass

Stem Stainless steel ASTM A582 Type 303

Packing Ethylene propylene O-ring

Operating

Controlled medium Water, glycol solutions to 50%

Medium temperature range 34°F to 230°F (1°C to 110°C)

Maximum inlet pressure 125 psig

Close off pressure

(AB-A)

Valve Size Inch (mm)

Pressure Psi (kPa)

1/2 (15)

44 (303)

3/4 (20)

44 (303)

1 (25)

22 (152)

Summary of content (6 pages)

PAGE 1
Technical Instructions Document No. 155-320P25 VE VV-1 599 Series Zone Valve Bodies: February 6, 2006 Two-Way and Three-Way Description The 599 Series two-way and three-way Zone Valves with a 1/10-inch (2.5 mm) stroke.
PAGE 2
Technical Instructions Document No. 155-320P25 February 6, 2006 599 Zone Valve Series: Two-Way and Three-Way Operating, continued Close-off ratings (AB-A) Leakage rate Flow characteristics According to ANSI/FCI 70-2 ANSI Class III (AB-A) Linear Miscellaneous Mounting location Dimensions Valve weight NEMA 1 (interior only) See Table 4 and Figures 7 and 8 See Table 4 Product Numbers Figure 1. 2-Way and 3-Way Zone Valves. 3-Way 2-Way Valve Table 1. Part Numbers.
PAGE 3
599 Zone Valve Series: Two-Way and Three-Way Technical Instructions Document No. 155-320P25 February 6, 2006 Table 2. Maximum Water Capacity - U.S. Gallons per Minute. Valve Size inches Cv\1 2 3 4 5 6 8 10 15 20 25 30 40 50 60 75 0.5 1.0 1.4 1.7 2.0 2.2 2.4 2.8 3.2 3.9 4.4 5.0 5.5 6.3 4.1 7.7 8.7 0.5 2.5 3.5 4.3 5.0 5.6 6.1 7.1 7.9 9.7 11.2 12.5 13.7 15.8 17.7 19.4 21.7 0.5/0.75 4.1 5.8 7.1 8.2 9.2 10.0 11.6 13.0 15.9 18.3 20.5 22.5 25.9 29.0 31.
PAGE 4
Technical Instructions Document No. 155-320P25 February 6, 2006 Operation 2-Way 599 Zone Valve Series: Two-Way and Three-Way Figure 3 shows the zone valve in the open or full flow position. The valve spring provides the necessary force to hold the stem in the raised or NO position. In the event of power failure, the actuator returns to its normal position; the actuator determines whether the valve will fail open or closed. See the actuator Technical Instructions for additional information. Figure 3.
PAGE 5
99 Zone Valve Series: Two-Way and Three-Way Sizing Technical Instructions Document No. 155-320P25 February 6, 2006 The sizing of a valve is important for correct system operation. An undersized valve will not have sufficient capacity at maximum load. An oversized valve can initiate cycling and can damage the seat and throttling plug because of the restricted opening. Correct sizing of the control valve for actual expected conditions is considered essential for good control.
PAGE 6
Technical Instructions Document No. 155-320P25 February 6, 2006 599 Zone Valve Series: Two-Way and Three-Way Dimensions Figure 7. 2-Way Valve Body. Figure 8. 3-Way Valve Body. Table 4. Valve Dimensions. Connection Type NPT Sweat Valve Size Inch (mm) 0.5 (15) 0.75 (20) 1.0 (25) 0.5) (15) 0.75 (20) 1.00 (25) 2-Way Valve 3-Way Valve A B C Weight lb (kg) A B C Weight lb (kg) 2.76 (70) 2.76 (70) 3.50 (89) 2.66 (66) 2.76 (70) 3.50 (89) 1.63 (41,5) 1.77 (45) 2.10 (54) 1.48 (38) 1.63 (41,5) 1.