Data Sheet for Product

Submittal Sheet Flowrite 599 Series, 2-way Valves, 1/2 to 2 Inch,
Document No. 154-006P25 Threaded, ANSI Class 250, Bronze Body
October 7, 2013
Table 5. PSI (kPa) Close-Off Ratings for Pneumatic Valve Assemblies, Equal Percentage.
Spring Range
3 to 8 psi (21 to 55 kPa)
10 to 15 psi
(69 to 103 kPa)
4”
Actuator
8”Actuator 4” Actuator
8”
Actuator
Action
Valve
Size,
Inches
(mm)
15 psi (103 kPa)
30 psi
(207 kPa)
0 psi (0 kPa)
1/2 (15) 142 (979) 250 (1724) 250 (1724) — —
3/4 (20) 80 (552) 231 (1593) 250 (1724) — —
1 (25) 52 (359) 150 (1034) 250 (1724) — —
1-1/4 (32) 32 (221) 93 (641) 250 (1724) — —
1-1/2 (40) 20 (138) 60 (414) 198 (1365) — —
Normally Open
2 (50) 12 (83) 37 (255) 123 (848) — —
1/2 (15) — — — 236 (1627) 250 (1724)
3/4 (20) — — — 155 (1069) 250 (1724)
1 (25) — — — 91 (627) 250 (1724)
1-1/4 (32) — — — 52 (359) 148 (1020)
1-1/2 (40) — — — 32 (331) 92 (634)
Normally
Closed
2 (50) — — — 20 (138) 55 (379)
Table 6. Valve Dimensions.
Action
Valve
Size
Inches
(mm)
A B C
Weight
lbs. (kg)
1/2 (15) 1-7/16 (36) 2-15/16 (74) 1-1/4 (32) 3 (1.4)
3/4 (20) 1-11/16 (43) 3-15/16 (99) 1-7/16 (36) 4 (1.8)
1 (25) 2 (50) 3-3/4 (96) 1-1/4 (32) 5 (2.3)
1-1/4 (32) 2-1/2 (62) 4-1/4 (109) 2 (50) 7 (3.2)
1-1/2 (40) 2-9/16 (65) 4-1/4 (109) 2 (50) 8 (3.6)
Normally
Open
2 (50) 3-1/8 (79) 4-9/16 (116) 2-1/4 (57) 16 (7.3)
1/2 (15) 1-7/16 (36) 3-13/16 (97) 2-13/16 (55) 3 (1.4)
3/4 (20) 1-11/16 (43) 3-13/16 (97) 2-13/16 (55) 4 (1.8)
1 (25) 2 (50) 3-13/16 (97) 2-13/16 (55) 5 (2.3)
1-1/4 (32) 2-1/2 (62) 3-13/16 (97) 2-13/16 (55) 7 (3.2)
1-1/2 (40) 2-9/16 (65) 3-7/8 (99) 2-1/4 (58) 8 (3.6)
V
F0292R1
B
C
AA
Normally
Closed
2 (50) 3-1/8 (79) 4-1/2 (114) 2-9/16 (65) 16 (7.3)
NOTE: For complete technical details on valves with linear characteristics, stainless steel trim, or union female, angle
female, or union male end connections, see Flowrite™ 599 Series Two-way Valves Technical Instructions,
(155-184P25).
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as
design improvements are introduced. Flowrite is a registered trademark of Siemens Industry, Inc. Product or company names mentioned herein
may be the trademarks of their respective owners. © 2013 Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089
USA
+ 1 847-215-1000
Your feedback is important to us. If you have comments
about this document, please send them to
[e-mail]
Document No. 154-006P25
Printed in the USA
Page 4 of 4