Data Sheet for Product

Flowrite 599 Series 2-1/2 to 6-Inch Valve, 2-Way & 3-Way and Actuator Assembly Selection Technical Bulletin 256
Document No. 155-776
December 26, 2017
Siemens Industry, Inc. Page 3
Product Number Selection
Use Table 1 for ANSI Class 125 valves. Begin at the left and select the specifications
necessary.
1. Select a two-way, normally closed, equal percentage flow characteristic according
to the specifications.
2. Select bronze trim for the low pressure water application and standard packing for
chilled water.
3. Select the 5-inch line size determined from the sizing example above. Note the
40 mm stroke of the valve. The valve part number is 599-05993.
4. Read across the top of the table to Electronic-hydraulic, 40 mm, and 24 Vac, 0-10
Vdc control signal.
The actuator part number is SKC62U.
The actuator code number is 294.
5. Read down the column to determine the valve and actuator assembly product
number is 294-05993.
NOTE: A valve and actuator can be ordered separately by using the part
numbers from Steps 3 and 4.
References
Two-Way Valves 2-1/2 to 6-inch Flanged Iron Body Technical Instructions (155-159)
Three-Way Valves 2-1/2 to 6-inch Flanged Iron Body Technical Instructions (155-160)