Datasheet

ManualsBrandsSiemens ManualsAutomationRemote Control Switch 2NO 12V 16A 2kW

Data sheet 5TT4102-3

Remote control switch with 2 NO contacts, Contact for 230 V AC,

400V 16A Control 12V AC

Model

Product brand name SENTRON

Product designation Remote control switch

Latching relay design Mechanical switch

General technical data

Electrical endurance (switching cycles) 50000

Pulse duration / minimum 50ms

Galvanic isolation / between magnet coil and contact Yes

Switching voltage / of the contacts / at AC / minimum 10V

Switching current / at AC / per contact / minimum 100mA

Power loss [V∙A] / of magnet coil / with pulse / rated

value

7V·A

Voltage

Type of voltage AC

Continuous voltage fuse version Yes

Surge voltage resistance / rated value 4kV

Supply voltage 400V

Supply voltage / minimum 250V

5TT4102-3 Subject to change without notice

Page 1/

Summary of content (5 pages)

PAGE 1
Data sheet 5TT4102-3 Remote control switch with 2 NO contacts, Contact for 230 V AC, 400V 16A Control 12V AC Model Product brand name SENTRON Product designation Remote control switch Latching relay design Mechanical switch General technical data Electrical endurance (switching cycles) 50 000 Pulse duration / minimum 50 ms Galvanic isolation / between magnet coil and contact Yes Switching voltage / of the contacts / at AC / minimum 10 V Switching current / at AC / per contact / minimum 100
PAGE 2
Protection class Protection class IP IP20, with connected conductors Switching capacity Switching capacity apparent power ● for fluorescent lamp load with DUO circuit 900 V·A ● for fluorescent lamp load with parallel compensation 400 V·A ● for uncompensated fluorescent lamp load 500 V·A Switching capacity current ● at cos phi 0.6 16 A ● Rated value 16 A Switching capacity active power / with filament lamp load 2 000 W Dissipation Power loss [W] ● at 16 A / per contact / rated value 1.
PAGE 3
Number of terminals 6 Number of NC contacts 0 Number of NO contacts 2 Number of CO contacts 0 Connections Connectable conductor cross-section ● for flexible conductor / with core end processing — minimum 1 mm² — maximum 6 mm² ● for rigid conductor — minimum 1 mm² — maximum 6 mm² Tightening torque / with screw-type terminals ● minimum 0.8 N·m ● maximum 1 N·m Mechanical Design Width of opening / of the contacts 1.
PAGE 4
Service&Support (Manuals, Certificates, Characteristics, FAQs,...) https://support.industry.siemens.com/cs/ww/en/ps/5TT4102-3 Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, ...) http://www.automation.siemens.com/bilddb/cax_en.aspx?mlfb=5TT4102-3 CAx-Online-Generator http://www.siemens.com/cax Tender specifications http://www.siemens.