Datasheet

ManualsBrandsSiemens ManualsAutomationRemote Control Switch 1NC + 1NO 24V 16A 2kW

Data sheet 5TT4105-2

Remote control switch with 1 NO contact, and 1 NC Contact for 230

V AC, 400V 16A Control 24 V AC

Model

Product brand name SENTRON

Product designation Remote control switch

Latching relay design Mechanical switch

General technical data

Electrical endurance (switching cycles) 50000

Pulse duration / minimum 50ms

Galvanic isolation / between magnet coil and contact Yes

Switching voltage / of the contacts / at AC / minimum 10V

Switching current / at AC / per contact / minimum 100mA

Power loss [V∙A] / of magnet coil / with pulse / rated

value

7V·A

Voltage

Type of voltage AC

Continuous voltage fuse version Yes

Surge voltage resistance / rated value 4kV

Supply voltage 250V

Supply voltage / minimum 250V

5TT4105-2 Subject to change without notice

Page 1/

Summary of content (5 pages)

PAGE 1
Data sheet 5TT4105-2 Remote control switch with 1 NO contact, and 1 NC Contact for 230 V AC, 400V 16A Control 24 V AC Model Product brand name SENTRON Product designation Remote control switch Latching relay design Mechanical switch General technical data Electrical endurance (switching cycles) 50 000 Pulse duration / minimum 50 ms Galvanic isolation / between magnet coil and contact Yes Switching voltage / of the contacts / at AC / minimum 10 V Switching current / at AC / per contact / mini
PAGE 2
Protection class Protection class IP IP20, with connected conductors Switching capacity Switching capacity apparent power ● for fluorescent lamp load with DUO circuit 900 V·A ● for fluorescent lamp load with parallel compensation 400 V·A ● for uncompensated fluorescent lamp load 500 V·A Switching capacity current ● at cos phi 0.6 16 A ● Rated value 16 A Switching capacity active power / with filament lamp load 2 000 W Dissipation Power loss [W] ● at 16 A / per contact / rated value 1.
PAGE 3
Number of terminals 6 Number of NC contacts 1 Number of NO contacts 1 Number of CO contacts 0 Connections Connectable conductor cross-section ● for flexible conductor / with core end processing — minimum 1 mm² — maximum 6 mm² ● for rigid conductor — minimum 1 mm² — maximum 6 mm² Tightening torque / with screw-type terminals ● minimum 0.8 N·m ● maximum 1 N·m Mechanical Design Width of opening / of the contacts 1.
PAGE 4
Service&Support (Manuals, Certificates, Characteristics, FAQs,...) https://support.industry.siemens.com/cs/ww/en/ps/5TT4105-2 Image database (product images, 2D dimension drawings, 3D models, device circuit diagrams, ...) http://www.automation.siemens.com/bilddb/cax_en.aspx?mlfb=5TT4105-2 CAx-Online-Generator http://www.siemens.com/cax Tender specifications http://www.siemens.