Data Sheet

Data sheet 6AG1055-1CB00-7BA2

SIPLUS LOGO! DM8 24 -40...+70 °C start up -25°C with conformal

coating based on 6ED1055-1CB00-0BA2 . Expansion module,

PS/I/O: 24V/24V/trans., 4 DI/4 DO for LOGO! 8

Installation type/mounting

Mounting on 35 mm DIN rail, 2 spacing units wide

Supply voltage

Rated value (DC)

● 24 V DC

Yes

permissible range, lower limit (DC) 20.4V

permissible range, upper limit (DC) 28.8V

Digital inputs

Number of digital inputs 4

Input voltage

● Type of input voltage

● for signal "0"

< 5 V DC

● for signal "1"

> 12 V DC

Input current

● for signal "0", max. (permissible quiescent

current)

0.88mA

6AG1055-1CB00-7BA2 Subject to change without notice

Page 1/

PAGE 1
Data sheet 6AG1055-1CB00-7BA2 SIPLUS LOGO! DM8 24 -40...+70 °C start up -25°C with conformal coating based on 6ED1055-1CB00-0BA2 . Expansion module, PS/I/O: 24V/24V/trans., 4 DI/4 DO for LOGO! 8 Installation type/mounting Mounting on 35 mm DIN rail, 2 spacing units wide Supply voltage Rated value (DC) ● 24 V DC Yes permissible range, lower limit (DC) 20.4 V permissible range, upper limit (DC) 28.
PAGE 2
● for signal "1", typ. 4 mA Input delay (for rated value of input voltage) for standard inputs — at "0" to "1", max. 1.5 ms — at "1" to "0", max. 1.5 ms Digital outputs Number of digital outputs 4 Short-circuit protection Yes Output current ● for signal "1" rated value 0.3 A Parallel switching of two outputs ● for uprating No Switching frequency ● with resistive load, max. 10 Hz ● with inductive load, max. 0.
PAGE 3
● With condensation, tested in accordance with IEC 60068-2-38, max. 100 %; RH incl. condensation / frost (no commissioning in bedewed state), horizontal installation Resistance Coolants and lubricants — Resistant to commercially available coolants and lubricants Yes; Incl.