Data Sheet

Data sheet 6AG1055-1FB00-7BA2

SIPLUS LOGO! DM8 230 V -40...+70°C start up -25°C with

conformal coating based on 6ED1055-1FB00-0BA2 . Expansion

module, PS/I/O: 230V/230V/relay, 2 MW, 4 DI/4 DO for LOGO! 8

Installation type/mounting

Mounting on 35 mm DIN rail, 2 spacing units wide

Supply voltage

Rated value (DC)

● 115 V DC

Yes

● 230 V DC

Yes

permissible range, lower limit (DC) 100V

permissible range, upper limit (DC) 253V

Rated value (AC)

● 115 V AC

Yes

● 230 V AC

Yes

Line frequency

● permissible range, lower limit

47Hz

● permissible range, upper limit

63Hz

Digital inputs

Number of digital inputs 4

6AG1055-1FB00-7BA2 Subject to change without notice

Page 1/

PAGE 1
Data sheet 6AG1055-1FB00-7BA2 SIPLUS LOGO! DM8 230 V -40...+70°C start up -25°C with conformal coating based on 6ED1055-1FB00-0BA2 .
PAGE 2
Input voltage ● Type of input voltage AC/DC ● for signal "0" < 40 V AC, < 30 V DC ● for signal "1" > 79 V AC, > 79 V DC Input current ● for signal "0", max. (permissible quiescent current) 0.06 mA; 0.05 mA with AC, 0.06 mA with DC ● for signal "1", typ. 0.37 mA Input delay (for rated value of input voltage) for standard inputs — at "0" to "1", max. 40 ms — at "1" to "0", max.
PAGE 3
● max. 70 °C; = Tmax; Tmax > +55 °C max. load 3 A per relay or max. total current 10 A ● At cold restart, min. -25 °C; incl. condensation / frost permitted (no commissioning under condensation conditions) Ambient temperature during storage/transportation ● min. -40 °C ● max. 70 °C Altitude during operation relating to sea level ● Installation altitude above sea level, max. 2 000 m ● Ambient air temperature-barometric pressurealtitude Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ...
PAGE 4
● Protection against fouling acc. to EN 60664-3 Yes; Type 1 protection ● Military testing according to MIL-I-46058C, Amendment 7 Yes; Discoloration of coating possible during service life ● Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830A Yes; Conformal coating, Class A Dimensions Width 35.