Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCsPLC add-on module 6AG1131-6BF00-7CA0

Data sheet 6AG1131-6BF00-7CA0

SIPLUS ET 200SP DI 8x24VDC HF -40...+70°C with conformal

coating based on 6ES7131-6BF00-0CA0 . digital input module, DI 8x

24 V DC High Feature, suitable for BU type A0, Color code CC01,

channel diagnostics

General information

Product type designation DI 8x24 V DC HF

Firmware version V2.0

● FW update possible

Yes

usable BaseUnits BU type A0

Color code for module-specific color identification

plate

CC01

Product function

● I&M data

Yes; I&M0 to I&M3

Engineering with

● PROFIBUS as of GSD version/GSD revision

GSD Revision 5

● PROFINET as of GSD version/GSD revision

GSDML V2.3

Operating mode

● DI

Yes

● Counter

● Oversampling

● MSI

Yes

Supply voltage

6AG1131-6BF00-7CA0 Subject to change without notice

Page 1/

Summary of content (5 pages)

PAGE 1
Data sheet 6AG1131-6BF00-7CA0 SIPLUS ET 200SP DI 8x24VDC HF -40...+70°C with conformal coating based on 6ES7131-6BF00-0CA0 . digital input module, DI 8x 24 V DC High Feature, suitable for BU type A0, Color code CC01, channel diagnostics General information Product type designation DI 8x24 V DC HF Firmware version V2.
PAGE 2
Rated value (DC) 24 V permissible range, lower limit (DC) 19.2 V permissible range, upper limit (DC) 28.8 V Reverse polarity protection Yes Encoder supply 24 V encoder supply ● 24 V Yes ● Short-circuit protection Yes; per channel, electronic ● Output current, max. 700 mA; Per channel Power loss Power loss, typ. 1.5 W Address area Address space per module ● Address space per module, max.
PAGE 3
for standard inputs — parameterizable Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms (in each case + delay of 30 to 500 µs, depending on line length) for interrupt inputs — parameterizable Yes for technological functions — parameterizable No Cable length ● shielded, max. 1 000 m ● unshielded, max. 600 m Encoder Connectable encoders ● 2-wire sensor — permissible quiescent current (2-wire sensor), max. Yes 1.
PAGE 4
● between the channels and backplane bus Yes ● between the channels and the power supply of the electronics No Isolation Isolation tested with 707 V DC (type test) Standards, approvals, certificates Suitable for safety functions No Ambient conditions Ambient temperature during operation ● horizontal installation, min. -40 °C; = Tmin (incl. condensation/frost) ● horizontal installation, max. 70 °C; = Tmax; > +60 °C encoder supply output current max.
PAGE 5
Usage in industrial process technology — Against chemically active substances acc. to EN 60654-4 Yes; Class 3 (excluding trichlorethylene) — Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04 Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil) Remark — Note regarding classification of environmental conditions acc.