Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCsPLC add-on module 6AG1132-4BB31-7AB0

Data sheet 6AG1132-4BB31-7AB0

SIPLUS ET 200S 2DO HF -25...+70 °C based on 6ES7132-4BB31-

0AB0 5 units per packing unit

Supply voltage

Reverse voltage protection Yes; when using the same load voltage as on the power module

Load voltage L+

● Rated value (DC)

24V; From power module

● Reverse polarity protection

Yes; polarity reversal can lead to the digital outputs being

connected through

Input current

from load voltage L+ (without load), max. 5mA; Per channel

from backplane bus 3.3 V DC, max. 10mA

Power loss

Power loss, typ. 1.4W

Address area

Address space per module

● Address space per module, max.

1byte

● with packing

2bit

Digital outputs

Type of digital output Transistor

6AG1132-4BB31-7AB0 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6AG1132-4BB31-7AB0 SIPLUS ET 200S 2DO HF -25...+70 °C based on 6ES7132-4BB310AB0 5 units per packing unit Supply voltage Reverse voltage protection Yes; when using the same load voltage as on the power module Load voltage L+ ● Rated value (DC) 24 V; From power module ● Reverse polarity protection Yes; polarity reversal can lead to the digital outputs being connected through Input current from load voltage L+ (without load), max. 5 mA; Per channel from backplane bus 3.3 V DC, max.
PAGE 2
Number of digital outputs 2 Short-circuit protection Yes ● Response threshold, typ. 4A Limitation of inductive shutdown voltage to -55 to -60 V, typ. L+( ) Controlling a digital input Yes Switching capacity of the outputs ● on lamp load, max. 5W Load resistance range ● lower limit 12 Ω ● upper limit 3 400 Ω Output voltage ● for signal "1", min. L+ (-1 V) Output current ● for signal "1" rated value 2A ● for signal "1" permissible range, min. 7 mA ● for signal "1" permissible range, max.
PAGE 3
● Group error SF (red) Yes ● Status indicator digital output (green) Yes Parameter Remark 3 byte Diagnostics wire break Disable / enable Diagnostics short-circuit Disable / enable Response to CPU/master STOP Substitute a value/keep last value Potential separation Potential separation digital outputs ● between the channels No ● between the channels and backplane bus Yes Isolation Isolation tested with 500 V DC Ambient conditions Ambient temperature during operation ● min.
PAGE 4
— Against chemically active substances acc. to EN 60654-4 Yes; Class 3 (excluding trichlorethylene) — Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04 Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil) Remark — Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.