Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1134-4NB01-7AB0 PLC add-on module

Data sheet 6AG1134-4NB01-7AB0

SIPLUS ET 200S EM 2AI TC HF 0...+70°C with conformal coating

based on 6ES7134-4NB01-0AB0 . 15 mm width, 15 bit+sign with

internal temperature Compensation

Supply voltage

Load voltage L+

● Rated value (DC)

24V; From power module

● Reverse polarity protection

Yes

Input current

from load voltage L+ (without load), max. 30mA

from backplane bus 3.3 V DC, max. 10mA

Power loss

Power loss, typ. 0.6W

Address area

Address space per module

● Address space per module, max.

4byte

Analog inputs

Number of analog inputs 2

permissible input voltage for voltage input

(destruction limit), max.

20V; ±20 V, continuous

6AG1134-4NB01-7AB0 Subject to change without notice

Page 1/

Summary of content (5 pages)

PAGE 1
Data sheet 6AG1134-4NB01-7AB0 SIPLUS ET 200S EM 2AI TC HF 0...+70°C with conformal coating based on 6ES7134-4NB01-0AB0 . 15 mm width, 15 bit+sign with internal temperature Compensation Supply voltage Load voltage L+ ● Rated value (DC) 24 V; From power module ● Reverse polarity protection Yes Input current from load voltage L+ (without load), max. 30 mA from backplane bus 3.3 V DC, max. 10 mA Power loss Power loss, typ. 0.6 W Address area Address space per module ● Address space per module, max.
PAGE 2
Cycle time (all channels) max.
PAGE 3
● Integration time (ms) 16,7 / 20 ms ● Interference voltage suppression for interference frequency f1 in Hz 50 / 60 Hz ● Conversion time (per channel) 66 ms; 66 / 80 ms; additional conversion time for diagnostic wire break test Smoothing of measured values ● parameterizable Yes; In four stages by means of digital filtering ● Step: None Yes; 1x cycle time ● Step: low Yes; 4x cycle time ● Step: Medium Yes; 32x cycle time ● Step: High Yes; 64x cycle time Errors/accuracies Linearity error (relat
PAGE 4
Measurement type/range Deactivated/ ±80 mV/ TC-EL Type T (Cu-CuNi)/ TC-EL Type K (NiCr-Ni)/ TC-EL Type B (PtRh-PtRh)/ TC-EL Type c (Wer-Wer) TC-EL Type N (NiCrSi-NiSi)/ TC-EL Type E (NiCr-CuNi)/ TC-EL Type R (PtRh-Pt)/ TC-EL Type S (PtRh-Pt)/ TC-EL Type J (FeCu-Ni)/ TC Group diagnostics Disable / enable Overflow/underflow Disable / enable Comparison point none / yes, internal Potential separation Potential separation analog inputs ● between the channels No ● between the channels and backplane bus
PAGE 5
— to biologically active substances according to EN 60721-3-6 Yes; Class 6B2 mold and fungal spores (excluding fauna); Class 6B3 on request — to chemically active substances according to EN 60721-3-6 Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-252 (severity degree 3); * — to mechanically active substances according to EN 60721-3-6 Yes; Class 6S3 incl. sand, dust; * Usage in industrial process technology — Against chemically active substances acc.