Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1134-6PA20-7BD0 PLC add-on module

Data sheet 6AG1134-6PA20-7BD0

SIPLUS ET 200SP AI EMETER 480VAC ST -40...+70°C with

conformal coating based on 6ES7134-6PA20-0BD0 . Analog Input

MODULE, AI ENERGY METER 480VAC ST, fits to BU-TYPE D0,

CHANNEL DIAGNOSIS

General information

Product type designation AI Energy Meter 480VAC ST

usable BaseUnits BU type D0

Product function

● Voltage measurement

Yes

— with voltage transformer

Yes

● Current measurement

Yes

— without current transformer

— with current transformer

Yes

● Energy measurement

Yes

● Frequency measurement

Yes

● Power measurement

Yes

● Active power measurement

Yes

● Reactive power measurement

Yes

● I&M data

Yes; I&M0 to I&M3

● Isochronous mode

Operating mode

● cyclic measurement

Yes

6AG1134-6PA20-7BD0 Subject to change without notice

Page 1/

Summary of content (6 pages)

PAGE 1
Data sheet 6AG1134-6PA20-7BD0 SIPLUS ET 200SP AI EMETER 480VAC ST -40...+70°C with conformal coating based on 6ES7134-6PA20-0BD0 .
PAGE 2
● acyclic measurement Yes ● Acyclic measured value access Yes ● Fixed measured value sets Yes ● Freely definable measured value sets Yes CiR – Configuration in RUN Reparameterization possible in RUN Yes Calibration possible in RUN Yes Installation type/mounting Mounting position Any Supply voltage Design of the power supply Supply via voltage measurement channel L1 Type of supply voltage AC 100 - 277 V permissible range, lower limit (AC) 90 V permissible range, upper limit (AC) 293 V L
PAGE 3
● Channel status display Yes; Green LED ● for channel diagnostics Yes; red Fn LED ● for module diagnostics Yes; green/red DIAG LED Integrated Functions Measuring functions ● Measuring procedure for voltage measurement TRMS ● Measuring procedure for current measurement TRMS ● Type of measured value acquisition seamless ● Curve shape of voltage Sinusoidal or distorted ● Buffering of measured variables Yes ● Parameter length 74 byte ● Bandwidth of measured value acquisition 2 kHz; Harmonics:
PAGE 4
— Rated value short-time withstand current restricted to 1 s 100 A — Input resistance measuring range 0 to 5 A 25 mΩ; At the terminal — Zero point suppression Parameterizable: 2 ... 250 mA, default 50 mA — Surge strength 10 A; for 1 minute Accuracy class according to IEC 61557-12 — Measured variable voltage 0,2 — Measured variable current 0,2 — Measured variable apparent power 0.5 — Measured variable active power 0.5 — Measured variable reactive power 1 — Measured variable power factor 0.
PAGE 5
— to biologically active substances according to EN 60721-3-3 Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request — to chemically active substances according to EN 60721-3-3 Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-252 (severity degree 3); * — to mechanically active substances according to EN 60721-3-3 Yes; Class 3S4 incl. sand, dust, * — Against mechanical environmental conditions acc.
PAGE 6
Data for selecting a current transformer ● Burden power current transformer x/1A, min. As a function of cable length and cross section, see device manual ● Burden power current transformer x/5A, min.