Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1135-4FB01-2AB0 PLC add-on module

Data sheet 6AG1135-4FB01-2AB0

SIPLUS ET 200S EM 2AO U -25...+60°C based on 6ES7135-4fb01-

0AB0

Supply voltage

Load voltage L+

● Rated value (DC)

24V; From power module

● Reverse polarity protection

Yes

Input current

from load voltage L+ (without load), max. 130mA

from backplane bus 3.3 V DC, max. 10mA

Power loss

Power loss, max. 2W

Address area

Address space per module

● Address space per module, max.

4byte

Analog outputs

Number of analog outputs 2

Voltage output, short-circuit protection Yes

Voltage output, short-circuit current, max. 25mA

Cycle time (all channels) max. 1.5ms

6AG1135-4FB01-2AB0 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6AG1135-4FB01-2AB0 SIPLUS ET 200S EM 2AO U -25...+60°C based on 6ES7135-4fb010AB0 Supply voltage Load voltage L+ ● Rated value (DC) 24 V; From power module ● Reverse polarity protection Yes Input current from load voltage L+ (without load), max. 130 mA from backplane bus 3.3 V DC, max. 10 mA Power loss Power loss, max. 2W Address area Address space per module ● Address space per module, max.
PAGE 2
Output ranges, voltage ● 1 V to 5 V Yes ● -10 V to +10 V Yes Connection of actuators ● for voltage output two-wire connection Yes; Without compensation of the line resistances ● for voltage output four-wire connection Yes Load impedance (in rated range of output) ● with voltage outputs, min. 1 kΩ ● with voltage outputs, capacitive load, max. 1 µF Destruction limits against externally applied voltages and currents ● Voltages at the outputs towards MANA 15 V; max. 15 V continuous; 75 V for max.
PAGE 3
Parameter Remark 7 byte Diagnostics short-circuit Disable / enable Output type/range deactivated / 1 to 5 V / ±10 V Group diagnostics Disable / enable Response to CPU/master STOP Output current and de-energized/substitute a value/keep last value Potential separation Potential separation analog outputs ● between the channels No ● between the channels and backplane bus Yes ● Between the channels and load voltage L+ Yes Ambient conditions Ambient temperature during operation ● min.
PAGE 4
— Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04 Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil) Remark — Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.