Data Sheet
● Channel status display
Yes; Green LED
● for channel diagnostics
Yes; Red LED
● for module diagnostics
Yes; green/red DIAG LED
Potential separation
Potential separation channels
● between the channels
No
● between the channels and backplane bus
Yes
● between the channels and the power supply of
the electronics
No
Isolation
Isolation tested with 707 V DC (type test)
Standards, approvals, certificates
Highest safety class achievable in safety mode
● Performance level according to ISO 13849-1
PLe
● SIL acc. to IEC 61508
SIL 3
Ambient conditions
Ambient temperature during operation
● horizontal installation, min.
-25°C; = Tmin (incl. condensation/frost)
● horizontal installation, max.
60°C; = Tmax; +70 °C with configured slots to the left and right of
the module
● vertical installation, min.
-25°C; = Tmin
● vertical installation, max.
50°C
Altitude during operation relating to sea level
● Installation altitude above sea level, max.
2000m
● Ambient air temperature-barometric pressure-
altitude
Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m)
Relative humidity
● With condensation, tested in accordance with
IEC 60068-2-38, max.
100%; RH incl. condensation / frost (no commissioning in
bedewed state), horizontal installation
Resistance
Coolants and lubricants
— Resistant to commercially available
coolants and lubricants
Yes; Incl. diesel and oil droplets in the air
Use in stationary industrial systems
— to biologically active substances according
to EN 60721-3-3
Yes; Class 3B2 mold, fungus and dry rot spores (with the
exception of fauna); Class 3B3 on request
— to chemically active substances according
to EN 60721-3-3
Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-
52 (severity degree 3); *
— to mechanically active substances
according to EN 60721-3-3
Yes; Class 3S4 incl. sand, dust, *
— Against mechanical environmental
conditions acc. to EN 60721-3-3
Yes; Class 3M8 using the SIPLUS Mounting Kit ET 200SP
(6AG1193-6AA00-0AA0)
6AG1136-6PA00-2BC0 Subject to change without notice
Page 4/
5
09/13/2019 © Copyright Siemens