Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCsPLC add-on module 6AG1137-6BD00-2BA0

Data sheet 6AG1137-6BD00-2BA0

SIPLUS ET 200SP CM 4XIO-LINK -40...+60°C start up temperature:

-25°C with conformal coating based on 6ES7137-6BD00-0BA0 . CM

4 X IO-LINK ST Communication Module IO-LINK MASTER V1.1

General information

Product type designation CM 4 x IO-Link ST

usable BaseUnits BU type A0

Color code for module-specific color identification

plate

CC04

Product function

● I&M data

Yes

Supply voltage

Rated value (DC) 24V

permissible range, lower limit (DC) 19.2V; 20.5 V if IO-Link is used, as the supply voltage for IO-Link

devices has to be at least 20 V at the master.

permissible range, upper limit (DC) 28.8V

Reverse polarity protection Yes

Input current

Current consumption, max. 45mA; without load

Encoder supply

6AG1137-6BD00-2BA0 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6AG1137-6BD00-2BA0 SIPLUS ET 200SP CM 4XIO-LINK -40...+60°C start up temperature: -25°C with conformal coating based on 6ES7137-6BD00-0BA0 . CM 4 X IO-LINK ST Communication Module IO-LINK MASTER V1.1 General information Product type designation CM 4 x IO-Link ST usable BaseUnits BU type A0 Color code for module-specific color identification plate CC04 Product function ● I&M data Yes Supply voltage Rated value (DC) 24 V permissible range, lower limit (DC) 19.2 V; 20.
PAGE 2
Number of outputs 4 Output current ● Rated value 200 mA Power loss Power loss, typ. 1W Digital outputs Cable length ● unshielded, max. 20 m; Also applies for shielded cables IO-Link Number of ports ● of which simultaneously controllable 4 4 IO-Link protocol 1.0 Yes IO-Link protocol 1.1 Yes Transmission rate 4.8 kBaud (COM1); 38.4 kBaud (COM2), 230.4 kBaud (COM3) Cycle time, min. 2 ms; dynamic, depending on user data length Size of process data, input per port 32 byte; max.
PAGE 3
Alarms ● Diagnostic alarm Yes; The port diagnosis is available in the IO-Link mode only.
PAGE 4
— Against mechanical environmental conditions acc. to EN 60721-3-3 Yes; Class 3M8 using the SIPLUS Mounting Kit ET 200SP (6AG1193-6AA00-0AA0) Use on ships/at sea — to biologically active substances according to EN 60721-3-6 Yes; Class 6B2 mold and fungal spores (excluding fauna); Class 6B3 on request — to chemically active substances according to EN 60721-3-6 Yes; Class 6C3 (RH < 75 %) incl. salt spray acc.