Data Sheet

PROFIBUS DP
● Transmission rate, max.
12Mbit/s
● SYNC capability
Yes
● FREEZE capability
Yes
● Direct data exchange (slave-to-slave
communication)
Yes
Protocols
Supports protocol for PROFINET IO No
PROFIBUS DP Yes
Protocols (Ethernet)
● TCP/IP
No
Isochronous mode
Isochronous operation (application synchronized up
to terminal)
Yes
Interrupts/diagnostics/status information
Alarms Yes
Diagnostics function Yes
Diagnostics indication LED
● Bus fault BF (red)
Yes
● Group error SF (red)
Yes
● Monitoring 24 V voltage supply ON (green)
Yes
Potential separation
between backplane bus and electronics No
between electronic block and PROFIBUS DP Yes
between supply voltage and electronics No
Permissible potential difference
between different circuits 75 V DC/60 V AC
Isolation
Isolation tested with 500 V DC
Standards, approvals, certificates
CE mark Yes
UL approval Yes
Ambient conditions
Ambient temperature during operation
● min.
-25°C; = Tmin
● max.
60°C; = Tmax
Altitude during operation relating to sea level
● Installation altitude above sea level, max.
5000m
6AG1151-1BA02-2AB0 Subject to change without notice
Page 2/
3
09/16/2019 © Copyright Siemens