Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1151-7FA21-2AB0 PLC CPU

Data sheet 6AG1151-7FA21-2AB0

SIPLUS ET 200S IM 151-7 F-CPU -25...+60°C with conformal

coating based on 6ES7151-7FA21-0AB0 . ET 200S 192 KB work

memory with integrated PROFIBUS DP Interface (9-pin D-sub,

female) AS DP slave, w/o battery SIMATIC MMC required

General information

HW functional status 01

Firmware version V3.3

Engineering with

● Programming package

V5.5 + SP1 or higher or V5.2 + SP1 or higher + HSP 219 +

Distributed Safety

Supply voltage

Rated value (DC) 24V

permissible range, lower limit (DC) 19.2V

permissible range, upper limit (DC) 28.8V

Reverse polarity protection Yes; against destruction

external protection for power supply lines

(recommendation)

24 V DC/16 A miniature circuit breaker with type B and C tripping

characteristics. Note: A 24 V DC/16 A miniature circuit breaker

with type B tripping characteristics trips before and with type C

tripping characteristic after the device protection fuse.

Mains buffering

● Mains/voltage failure stored energy time

5ms

Input current

Inrush current, max. 1.8A; Typical

6AG1151-7FA21-2AB0 Subject to change without notice

Page 1/

Summary of content (11 pages)

PAGE 1
Data sheet 6AG1151-7FA21-2AB0 SIPLUS ET 200S IM 151-7 F-CPU -25...+60°C with conformal coating based on 6ES7151-7FA21-0AB0 . ET 200S 192 KB work memory with integrated PROFIBUS DP Interface (9-pin D-sub, female) AS DP slave, w/o battery SIMATIC MMC required General information HW functional status 01 Firmware version V3.3 Engineering with ● Programming package V5.5 + SP1 or higher or V5.
PAGE 2
I²t 0.09 A²·s from supply voltage 1L+, max. 320 mA; 410 mA with DP master module Output current for backplane bus (5 V DC), max. 700 mA Power loss Power loss, typ. 4.2 W Memory Work memory ● integrated 192 kbyte ● expandable No ● Size of retentive memory for retentive data blocks 64 kbyte Load memory ● Plug-in (MMC) Yes ● Plug-in (MMC), max. 8 Mbyte ● Data management on MMC (after last programming), min.
PAGE 3
● Number of time alarm OBs 1; OB 10 ● Number of delay alarm OBs 2; OB 20, 21 ● Number of cyclic interrupt OBs 4; OB 32, 33, 34, 35 ● Number of process alarm OBs 1; OB 40 ● Number of DPV1 alarm OBs 3; OB 55, 56, 57 ● Number of startup OBs 1; OB 100 ● Number of asynchronous error OBs 6; OB 80, 82, 83 (for centralized I/O only, not for distributed I/O), 85, 86, 87 ● Number of synchronous error OBs 2; OB 121, 122 Nesting depth ● per priority class 16 ● additional within an error OB 4 Counter
PAGE 4
Data areas and their retentivity Flag ● Number, max. 256 byte ● Retentivity available Yes; MB 0 to MB 255 ● Retentivity preset MB 0 to MB 15 ● Number of clock memories 8; 1 memory byte Data blocks ● Retentivity adjustable Yes; via non-retain property on DB ● Retentivity preset Yes Local data ● per priority class, max. 32 kbyte; Max.
PAGE 5
Time of day Clock ● Hardware clock (real-time) Yes ● retentive and synchronizable Yes ● Backup time 6 wk; At 40 °C ambient temperature, typically ● Deviation per day, max. 10 s; Typ.
PAGE 6
— Global data communication Yes — S7 basic communication Yes — S7 communication Yes; Only server, configured on one side — S7 communication, as client No — S7 communication, as server Yes PROFIBUS DP slave ● GSD file The latest GSD file is available on the Internet (http://www.siemens.com/profibus-gsd) ● Transmission rate, max. 12 Mbit/s ● automatic baud rate search Yes; only with passive interface ● Address area, max. 32 ● User data per address area, max. 32 byte; Up to max.
PAGE 7
— Global data communication No — S7 basic communication Yes; I blocks only — S7 communication Yes; Only server, configured on one side — S7 communication, as client No — S7 communication, as server Yes — Equidistance Yes — Isochronous mode No — SYNC/FREEZE Yes — Activation/deactivation of DP slaves Yes — Number of DP slaves that can be simultaneously activated/deactivated, max. 8 — Direct data exchange (slave-to-slave communication) Yes — DPV1 Yes Address area — Inputs, max.
PAGE 8
● as server Yes ● as client No ● User data per job, max. See online help of STEP 7 (shared parameters of the SFBs/FBs and of the SFCs/FCs of S7 Communication) ● User data per job (of which consistent), max. See online help of STEP 7 (shared parameters of the SFBs/FBs and of the SFCs/FCs of S7 Communication) Number of connections ● overall 12 ● usable for PG communication 11 — reserved for PG communication 1 — adjustable for PG communication, min. 1 — adjustable for PG communication, max.
PAGE 9
● Forcing, variables Inputs, outputs ● Number of variables, max. 10 Diagnostic buffer ● present Yes ● Number of entries, max. 500 — adjustable No — of which powerfail-proof 100; Only the last 100 entries are retained ● Number of entries readable in RUN, max.
PAGE 10
Resistance Use in stationary industrial systems — to biologically active substances according to EN 60721-3-3 Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request — to chemically active substances according to EN 60721-3-3 Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-252 (severity degree 3); * — to mechanically active substances according to EN 60721-3-3 Yes; Class 3S4 incl.
PAGE 11
— HiGraph® Yes; Optional Know-how protection ● User program protection/password protection Yes ● Block encryption Yes; With S7 block Privacy Cycle time monitoring ● lower limit 1 ms ● upper limit 6 000 ms ● adjustable Yes ● preset 150 ms Dimensions Width 60 mm; DP master module: 35 mm Height 119.5 mm Depth 75 mm Weights Weight, approx. 200 g; DP master module: Approx.