Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCsPLC add-on module 6AG1153-2BA10-2XY0

Data sheet 6AG1153-2BA10-2XY0

SIPLUS ET 200M IM153-2 (*BA02) T1 RAIL -25 ... +55°C T1 with

70°C for 10 min with conformal coating based on 6ES7153-2BA10-

0XB0 . Connection ET 200M IM 153-2 High Feature for max. 12 S7-

300 modules with redundancy capability, Timestamping suitable for

isochronous mode Operation New features: up to 12 modules can be

used Slave Initiative for Drive ES

General information

Product type designation IM 153-2

Firmware version V6.0.0

Vendor identification (VendorID) 801Eh

Supply voltage

Rated value (DC)

● 24 V DC

Yes

permissible range, lower limit (DC) 20.4V

permissible range, upper limit (DC) 28.8V

external protection for power supply lines

(recommendation)

2,5 A

Mains buffering

● Mains/voltage failure stored energy time

5ms

Input current

Current consumption, max. 650mA; with 24 V DC supply

Inrush current, typ. 3A

I²t 0.1A²·s

Output current

6AG1153-2BA10-2XY0 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6AG1153-2BA10-2XY0 SIPLUS ET 200M IM153-2 (*BA02) T1 RAIL -25 ... +55°C T1 with 70°C for 10 min with conformal coating based on 6ES7153-2BA100XB0 . Connection ET 200M IM 153-2 High Feature for max. 12 S7300 modules with redundancy capability, Timestamping suitable for isochronous mode Operation New features: up to 12 modules can be used Slave Initiative for Drive ES General information Product type designation IM 153-2 Firmware version V6.0.
PAGE 2
for backplane bus (5 V DC), max. 1.5 A Power loss Power loss, typ. 5.5 W Address area Addressing volume ● Inputs 244 byte ● Outputs 244 byte Hardware configuration Number of modules per DP slave interface, max. 12 Time stamping Accuracy 1 ms; 1ms at up to 8 modules; 10ms at up to 12 modules Number of message buffers 15 Messages per message buffer 20 Number of stampable digital inputs, max. 128; Max. 128 signals/station; max. 32 signals/slot Time format RFC 1119 Time resolution 0.
PAGE 3
Potential separation Potential separation exists Yes Isolation Isolation tested with Isolation voltage 500 V Degree and class of protection IP degree of protection IP20 Standards, approvals, certificates Railway application ● EN 50155 Yes; T1 Category 1 Class A/B horizontal mounting position Ambient conditions Ambient temperature during operation ● min. -25 °C; = Tmin ● max. 60 °C; = Tmax; the rated temperature range of -25 ...
PAGE 4
Usage in industrial process technology — Against chemically active substances acc. to EN 60654-4 Yes; Class 3 (excluding trichlorethylene) — Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04 Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil) Remark — Note regarding classification of environmental conditions acc.