Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCsPLC add-on module 6AG1155-5BA00-2AB0

Data sheet 6AG1155-5BA00-2AB0

SIPLUS ET 200MP -40...+60°C with conformal coating based on

6ES7155-5BA00-0AB0 . PROFIBUS connection IM 155-5 DP ST for

max. 12 S7-1500 modules

General information

Product type designation IM 155-5 DP ST

HW functional status 01

Firmware version V2.0.0

Vendor identification (VendorID) 81AAh

Product function

● I&M data

Yes; I&M0 to I&M3

Engineering with

● STEP 7 TIA Portal configurable/integrated as of

version

V13 / V13

● STEP 7 configurable/integrated as of version

V5.5 SP3 / -

● PROFIBUS as of GSD version/GSD revision

V1.0 / V5.1

Supply voltage

Rated value (DC) 24V

permissible range, lower limit (DC) 20.4V

permissible range, upper limit (DC) 28.8V

Reverse polarity protection Yes

Mains buffering

● Mains/voltage failure stored energy time

5ms

6AG1155-5BA00-2AB0 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6AG1155-5BA00-2AB0 SIPLUS ET 200MP -40...+60°C with conformal coating based on 6ES7155-5BA00-0AB0 . PROFIBUS connection IM 155-5 DP ST for max. 12 S7-1500 modules General information Product type designation IM 155-5 DP ST HW functional status 01 Firmware version V2.0.
PAGE 2
Input current Current consumption (rated value) 0.2 A; at 24 V DC and without load Current consumption, max. 1.2 A; at 20.4 V DC and max. load Inrush current, max. 4A I²t 0.09 A²·s from interface 5 V DC, max. 80 mA Power Infeed power to the backplane bus 14 W Power loss Power loss, typ. 4 W; Typical Address area Address space per module ● Address space per module, max. 128 byte; per input / output Address space per station ● Address space per station, max.
PAGE 3
● RUN LED Yes; Green LED ● ERROR LED Yes; Red LED ● MAINT LED Yes; Yellow LED Potential separation between backplane bus and electronics No between PROFIBUS DP and all other circuit components Yes between supply and all other circuits No Permissible potential difference between different circuits 75 V DC/60 V AC Isolation Isolation tested with 707 V DC (type test) Ambient conditions Ambient temperature during operation ● horizontal installation, min. -40 °C; = Tmin (incl.
PAGE 4
Usage in industrial process technology — Against chemically active substances acc. to EN 60654-4 Yes; Class 3 (excluding trichlorethylene) — Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04 Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil) Remark — Note regarding classification of environmental conditions acc.