Data Sheet

Data sheet 6AG1193-6BP00-7BA0

SIPLUS ET 200SP, BASEUNIT BU15-P16+A0+2B, BU-TYPE A0, -

40... +70°C with conformal coating based on 6ES7193-6BP00-0BA0 .

PUSH-IN TERMINALS, W/O AUX-TERMINALS, BRIDGED TO LEFT

BU WXH: 15MMX117MM

General information

Product type designation BU type A0

Supply voltage

Rated value (DC) 24V

external protection for power supply lines Yes; 24 V DC/10 A miniature circuit breaker with type B or C

tripping characteristic

Current carrying capacity

up to 60 °C, max. 10A

Potential separation

between backplane bus and supply voltage Yes

Isolation

Isolation tested with 707 V DC

Ambient conditions

Ambient temperature during operation

● horizontal installation, min.

-40°C; = Tmin (incl. condensation/frost)

6AG1193-6BP00-7BA0 Subject to change without notice

Page 1/

PAGE 1
Data sheet 6AG1193-6BP00-7BA0 SIPLUS ET 200SP, BASEUNIT BU15-P16+A0+2B, BU-TYPE A0, 40... +70°C with conformal coating based on 6ES7193-6BP00-0BA0 . PUSH-IN TERMINALS, W/O AUX-TERMINALS, BRIDGED TO LEFT BU WXH: 15MMX117MM General information Product type designation BU type A0 Supply voltage Rated value (DC) 24 V external protection for power supply lines Yes; 24 V DC/10 A miniature circuit breaker with type B or C tripping characteristic Current carrying capacity up to 60 °C, max.
PAGE 2
● horizontal installation, max. 70 °C; = Tmax Altitude during operation relating to sea level ● Installation altitude above sea level, max. 5 000 m ● Ambient air temperature-barometric pressurealtitude Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m) Relative humidity ● With condensation, tested in accordance with IEC 60068-2-38, max.
PAGE 3
● Protection against fouling acc. to EN 60664-3 Yes; Type 1 protection ● Military testing according to MIL-I-46058C, Amendment 7 Yes; Discoloration of coating possible during service life ● Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830A Yes; Conformal coating, Class A Dimensions Width 15 mm Height 117 mm Depth 35 mm Weights Weight, approx.