Data Sheet

Data sheet 6AG1193-6BP00-7BD0

SIPLUS ET 200SP -40...+70°C with conformal coating based on

6ES7193-6BP00-0BD0. BaseUnit BU20-P12+A0+0B, BU type D0,

Push-in terminals, without AUX terminals, bridged to the left, WxH:

20 mmx117 mm

General information

Product type designation BU type D0

Supply voltage

Rated value (AC) 400V; 230 V AC (L1, N)

Current carrying capacity

up to 60 °C, max. 5A

Potential separation

between backplane bus and supply voltage Yes

Isolation

Isolation tested with 3 250 V DC

Ambient conditions

Ambient temperature during operation

● horizontal installation, min.

-40°C; = Tmin (incl. condensation/frost)

● horizontal installation, max.

70°C; = Tmax

● vertical installation, min.

-40°C

● vertical installation, max.

50°C

Altitude during operation relating to sea level

6AG1193-6BP00-7BD0 Subject to change without notice

Page 1/

PAGE 1
Data sheet 6AG1193-6BP00-7BD0 SIPLUS ET 200SP -40...+70°C with conformal coating based on 6ES7193-6BP00-0BD0. BaseUnit BU20-P12+A0+0B, BU type D0, Push-in terminals, without AUX terminals, bridged to the left, WxH: 20 mmx117 mm General information Product type designation BU type D0 Supply voltage Rated value (AC) 400 V; 230 V AC (L1, N) Current carrying capacity up to 60 °C, max.
PAGE 2
● Installation altitude above sea level, max. 3 000 m ● Ambient air temperature-barometric pressurealtitude Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... Tmax -5K) at 795 hPa ... 701 hPa (+2 000 m ... +3 000 m) Relative humidity ● With condensation, tested in accordance with IEC 60068-2-38, max. 100 %; RH incl.
PAGE 3
● Qualification and Performance of Electrical Insulating Compound for Printed Board Assemblies according to IPC-CC-830A Yes; Conformal coating, Class A Dimensions Width 20 mm Height 117 mm Depth 35 mm Weights Weight, approx.