Data Sheet

Data sheet 6AG1195-7KF00-2XA0

SIMATIC S7-300 safety protector -25...+60°C with conformal coating

based on 6ES7195-7KF00-0XA0 . Safety protector between F and

standard modules With redundant ET 200M interface modules, use

only with partition

Standards, approvals, certificates

CE mark Yes

UL approval Yes; File E239877

Ambient conditions

Ambient temperature during operation

● min.

-25°C; = Tmin

● max.

60°C; = Tmax

Ambient temperature during storage/transportation

● min.

-40°C

● max.

70°C

Altitude during operation relating to sea level

● Installation altitude above sea level, max.

2000m

● Ambient air temperature-barometric pressure-

altitude

Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m)

Relative humidity

● With condensation, tested in accordance with

IEC 60068-2-38, max.

100%; RH incl. condensation/frost (no commissioning under

condensation conditions)

Resistance

6AG1195-7KF00-2XA0 Subject to change without notice

Page 1/

PAGE 1
Data sheet 6AG1195-7KF00-2XA0 SIMATIC S7-300 safety protector -25...+60°C with conformal coating based on 6ES7195-7KF00-0XA0 . Safety protector between F and standard modules With redundant ET 200M interface modules, use only with partition Standards, approvals, certificates CE mark Yes UL approval Yes; File E239877 Ambient conditions Ambient temperature during operation ● min. -25 °C; = Tmin ● max. 60 °C; = Tmax Ambient temperature during storage/transportation ● min. -40 °C ● max.
PAGE 2
Use in stationary industrial systems — to biologically active substances according to EN 60721-3-3 Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request — to chemically active substances according to EN 60721-3-3 Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-252 (severity degree 3); * — to mechanically active substances according to EN 60721-3-3 Yes; Class 3S4 incl.