Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1214-1HG40-5XB0 PLC CPU

Data sheet 6AG1214-1HG40-5XB0

SIPLUS S7-1200 CPU 1214C DC/DC/relay -40...+60°C with

conformal coating Signal board usable based on 6ES7214-1HG40-

0XB0 . compact CPU, DC/DC/relay, onboard I/O: "14 DI 24 V DC; 10

DO relay 2" "A; 2 AI 0-10 V DC, Power" supply: AC 20.4-28.8V DC,

Program/data memory 100 KB

General information

Product type designation CPU 1214C DC/DC/relay

Firmware version V4.1

Engineering with

● Programming package

STEP 7 V13 SP1 or higher

Supply voltage

Rated value (DC)

● 24 V DC

Yes

permissible range, lower limit (DC) 20.4V

permissible range, upper limit (DC) 28.8V

Load voltage L+

● Rated value (DC)

24V

● permissible range, lower limit (DC)

20.4V

● permissible range, upper limit (DC)

28.8V

Input current

Current consumption (rated value) 500mA; CPU only

Current consumption, max. 1500mA; CPU with all expansion modules

Inrush current, max. 12A; at 28.8 V

6AG1214-1HG40-5XB0 Subject to change without notice

Page 1/

Summary of content (8 pages)

PAGE 1
Data sheet 6AG1214-1HG40-5XB0 SIPLUS S7-1200 CPU 1214C DC/DC/relay -40...+60°C with conformal coating Signal board usable based on 6ES7214-1HG400XB0 . compact CPU, DC/DC/relay, onboard I/O: "14 DI 24 V DC; 10 DO relay 2" "A; 2 AI 0-10 V DC, Power" supply: AC 20.4-28.8V DC, Program/data memory 100 KB General information Product type designation CPU 1214C DC/DC/relay Firmware version V4.
PAGE 2
Output current for backplane bus (5 V DC), max. 1 600 mA; Max. 5 V DC for SM and CM Encoder supply 24 V encoder supply ● 24 V L+ minus 4 V DC min. Power loss Power loss, typ. 12 W Memory Work memory ● integrated 100 kbyte ● expandable No Load memory ● integrated 4 Mbyte ● Plug-in (SIMATIC Memory Card), max. with SIMATIC memory card Backup ● present Yes; maintenance-free ● without battery Yes CPU processing times for bit operations, typ. 0.085 µs; / instruction for word operations, typ.
PAGE 3
Clock ● Hardware clock (real-time) Yes ● Backup time 480 h; Typical ● Deviation per day, max. 60 s/month at 25 °C Digital inputs Number of digital inputs ● of which inputs usable for technological functions Source/sink input 14; Integrated 6; HSC (High Speed Counting) Yes Number of simultaneously controllable inputs all mounting positions — up to 40 °C, max. 14 Input voltage ● Rated value (DC) 24 V ● for signal "0" 5 V DC at 1 mA ● for signal "1" 15 V DC at 2.
PAGE 4
● Number of operating cycles, max. mechanically 10 million, at rated load voltage 100 000 Cable length ● shielded, max. 500 m ● unshielded, max. 150 m Analog inputs Number of analog inputs 2 Input ranges ● Voltage Yes Input ranges (rated values), voltages ● 0 to +10 V Yes ● Input resistance (0 to 10 V) ≥100k ohms Cable length ● shielded, max.
PAGE 5
Services — Number of connectable IO Devices, max. 16 PROFINET IO Device Services — Shared device Yes — Number of IO Controllers with shared device, max.
PAGE 6
Number of counters 6 Counting frequency (counter) max. 100 kHz Frequency measurement Yes controlled positioning Yes Number of position-controlled positioning axes, max.
PAGE 7
● Fall height, max. 0.3 m; five times, in product package Ambient temperature during operation ● min. -40 °C; = Tmin (incl. condensation/frost); start-up @ -25 °C ● max. 60 °C; = Tmax; Tmax > +55 °C number of simultaneously switched-on digital inputs 7, digital outputs 5, analog inputs 2 (no adjacent points) with horizontal mounting position ● At cold restart, min. -25 °C Ambient temperature during storage/transportation ● min. -40 °C ● max.
PAGE 8
Usage in industrial process technology — Against chemically active substances acc. to EN 60654-4 Yes; Class 3 (excluding trichlorethylene) — Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04 Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil) Remark — Note regarding classification of environmental conditions acc.