Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1223-1PH32-4XB0 PLC add-on module

Data sheet 6AG1223-1PH32-4XB0

SIPLUS S7-1200 SM 1223 8DI/8DQ RLY for medial exposure with

conformal coating based on 6ES7223-1PH32-0XB0 . Digital

input/output 8 DI/8 DQ, 8 DI 24 V DC, Sink/Source, 8 DQ, relay 2:00

General information

Product type designation SM 1223, DI 8x24 V DC, DQ 8x relay

Supply voltage

Rated value (DC) 24V

permissible range, lower limit (DC) 20.4V

permissible range, upper limit (DC) 28.8V

Input current

from backplane bus 5 V DC, max. 145mA

Digital inputs

● from load voltage L+ (without load), max.

4 mA/input 11 mA/relay

Output voltage

Power supply to the transmitters

● present

Yes

Power loss

Power loss, typ. 5.5W

6AG1223-1PH32-4XB0 Subject to change without notice

Page 1/

Summary of content (5 pages)

PAGE 1
Data sheet 6AG1223-1PH32-4XB0 SIPLUS S7-1200 SM 1223 8DI/8DQ RLY for medial exposure with conformal coating based on 6ES7223-1PH32-0XB0 . Digital input/output 8 DI/8 DQ, 8 DI 24 V DC, Sink/Source, 8 DQ, relay 2:00 AM General information Product type designation SM 1223, DI 8x24 V DC, DQ 8x relay Supply voltage Rated value (DC) 24 V permissible range, lower limit (DC) 20.4 V permissible range, upper limit (DC) 28.8 V Input current from backplane bus 5 V DC, max.
PAGE 2
Digital inputs Number of digital inputs ● in groups of Input characteristic curve in accordance with IEC 61131, type 1 8 2 Yes Number of simultaneously controllable inputs all mounting positions — up to 40 °C, max. 8 horizontal installation — up to 40 °C, max. 8 — up to 50 °C, max. 8 vertical installation — up to 40 °C, max. 8 Input voltage ● Type of input voltage DC ● Rated value (DC) 24 V ● for signal "0" 5 V DC at 1 mA ● for signal "1" 15 V DC at 2.
PAGE 3
Output current ● for signal "1" permissible range, max. 2A Output delay with resistive load ● "0" to "1", max. 10 ms ● "1" to "0", max. 10 ms Total current of the outputs (per group) horizontal installation — up to 50 °C, max. 10 A; Current per mass Relay outputs ● Number of relay outputs 8 ● Rated supply voltage of relay coil L+ (DC) 24 V ● Number of operating cycles, max. mechanically 10 million, at rated load voltage 100 000 Switching capacity of contacts — with inductive load, max.
PAGE 4
IP degree of protection IP20 Ambient conditions Free fall ● Fall height, max. 0.3 m; five times, in product package Ambient temperature during operation ● min. -20 °C; = Tmin (incl. condensation/frost); start-up @ 0 °C ● max. 60 °C; = Tmax ● At cold restart, min. 0 °C Ambient temperature during storage/transportation ● min. -40 °C ● max. 70 °C Altitude during operation relating to sea level ● Installation altitude above sea level, max.
PAGE 5
Remark — Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.04 * The supplied plug covers must remain in place over the unused interfaces during operation! Conformal coating ● Coatings for printed circuit board assemblies acc. to EN 61086 Yes; Class 2 for high availability ● Protection against fouling acc.