Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1305-1BA80-2AA0 PLC power supply

Data sheet 6AG1305-1BA80-2AA0

SIPLUS S7-300 PS 305 -25...+70 °C with conformal coating

according to EN 50155 T1 Cat 1 Cl A/B based on 6ES7305-1BA80-

0AA0 . Stabilized power supplies Input: 24-110 V DC Output: 24 V

DC/2 A

Supply voltage

Rated value (DC)

● 24 V DC

Yes

● 48 V DC

Yes

● 72 V DC

Yes

● 96 V DC

Yes

● 120 V DC

Yes; Rated value 110 V DC

permissible range, lower limit (DC) 16.8V

permissible range, upper limit (DC) 138V

Mains buffering

● Mains/voltage failure stored energy time

10ms; Corresponds to S2 and C1 of EN 50155

● Repeat rate, min.

1s

Input current

Rated value at 24 V DC 2.7A

Rated value at 48 V DC 1.3A

Rated value at 72 V DC 0.9A

Rated value at 96 V DC 0.65A

6AG1305-1BA80-2AA0 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6AG1305-1BA80-2AA0 SIPLUS S7-300 PS 305 -25...+70 °C with conformal coating according to EN 50155 T1 Cat 1 Cl A/B based on 6ES7305-1BA800AA0 . Stabilized power supplies Input: 24-110 V DC Output: 24 V DC/2 A Supply voltage Rated value (DC) ● 24 V DC Yes ● 48 V DC Yes ● 72 V DC Yes ● 96 V DC Yes ● 120 V DC Yes; Rated value 110 V DC permissible range, lower limit (DC) 16.
PAGE 2
Rated value at 110 V DC 0.6 A Inrush current, max. 20 A I²t 5 A²·s Leakage current, typ. 0.7 mA Leakage current, max. 3.5 mA Overcurrent overload capability 270 ms on short circuit during startup and operation Output voltage Rated value (DC) 24 V permissible range, lower limit (DC) 23.27 V permissible range, upper limit (DC) 24.72 V Power up time, max. 3s Residual ripple, typ. 30 mV; Peak - peak Residual ripple, max.
PAGE 3
● EN 50155 Yes; Sections 4, 5 and 12; no further agreements apply; T1, Category 1, Class A/B, EN 50155:2007 Ambient conditions Ambient temperature during operation ● min. -25 °C; = Tmin ● max. 70 °C; = Tmax; for use on railway vehicles according to EN 50155, the rated temperature range -25 ... +55 °C (T1) or 60 °C @ UL/UL hazardous use applies Altitude during operation relating to sea level ● Installation altitude above sea level, max.
PAGE 4
Remark — Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.04 * The supplied plug covers must remain in place over the unused interfaces during operation! Dimensions Width 80 mm Height 125 mm Depth 120 mm Weights Weight, approx.