Data Sheet

● for inductive load
0.5ms
Encoder
Connection of signal encoders
● for voltage measurement
Yes
● for current measurement as 2-wire transducer
Yes; with external supply
● for current measurement as 4-wire transducer
Yes
● for resistance measurement with two-wire
connection
Yes; Without compensation of the line resistances
● for resistance measurement with three-wire
connection
No
● for resistance measurement with four-wire
connection
No
Connectable encoders
● 2-wire sensor
Yes
— permissible quiescent current (2-wire
sensor), max.
1.5mA
Errors/accuracies
Temperature error (relative to input range), (+/-) 0.006%/K
Crosstalk between the inputs, min. 60dB
Repeat accuracy in steady state at 25 °C (relative to
input range), (+/-)
0.06%
Output ripple (relative to output range, bandwidth 0 to
50 kHz), (+/-)
0.1%
Linearity error (relative to output range), (+/-) 0.15%
Temperature error (relative to output range), (+/-) 0.01%/K
Crosstalk between the outputs, min. 60dB
Repeat accuracy in steady state at 25 °C (relative to
output range), (+/-)
0.06%
Operational error limit in overall temperature range
● Voltage, relative to input range, (+/-)
1%
● Current, relative to input range, (+/-)
1%
● Resistance, relative to input range, (+/-)
1%
● Voltage, relative to output range, (+/-)
1%
● Current, relative to output range, (+/-)
1%
Basic error limit (operational limit at 25 °C)
● Voltage, relative to input range, (+/-)
0.8%; Linearity error ±0.06 %
● Current, relative to input range, (+/-)
0.8%; Linearity error ±0.06 %
● Resistance, relative to input range, (+/-)
0.8%; Linearity error ±0.2 %
● Resistance thermometer, relative to input
range, (+/-)
0.8%
● Voltage, relative to output range, (+/-)
0.8%
● Current, relative to output range, (+/-)
0.8%
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
6AG1313-5BG04-7AB0 Subject to change without notice
Page 10/
16
09/13/2019 © Copyright Siemens