Data Sheet

Switching capacity of the outputs
● on lamp load, max.
5W
Load resistance range
● lower limit
48Ω
● upper limit
4kΩ
Output voltage
● for signal "1", min.
L+ (-0.8 V)
Output current
● for signal "1" rated value
500mA
● for signal "1" permissible range, min.
5mA
● for signal "1" permissible range, max.
0.6A
● for signal "1" minimum load current
5mA
● for signal "0" residual current, max.
0.5mA
Parallel switching of two outputs
● for uprating
No
● for redundant control of a load
Yes
Switching frequency
● with resistive load, max.
100Hz
● with inductive load, max.
0.5Hz
● on lamp load, max.
100Hz
● of the pulse outputs, with resistive load, max.
2.5kHz
Total current of the outputs (per group)
horizontal installation
— up to 40 °C, max.
3A
— up to 60 °C, max.
2A; 1.5 A @ > 60 °C
vertical installation
— up to 40 °C, max.
2A
Cable length
● shielded, max.
1000m
● unshielded, max.
600m
Analog inputs
Number of analog inputs 4
● For voltage/current measurement
4
● For resistance/resistance thermometer
measurement
1
integrated channels (AI) 5; 4x current/voltage, 1x resistance
permissible input voltage for current input
(destruction limit), max.
5V; Permanent
permissible input voltage for voltage input
(destruction limit), max.
30V; Permanent
permissible input current for voltage input
(destruction limit), max.
0.5mA; Permanent
6AG1313-5BG04-7AB0 Subject to change without notice
Page 7/
16
09/13/2019 © Copyright Siemens