Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1314-1AG14-7AB0 PLC CPU

Data sheet 6AG1314-1AG14-7AB0

SIPLUS S7-300 CPU 314 -25...+70 °C with conformal coating based

on 6ES7314-1AG14-0AB0 . Central processing unit with MPI, Integr.

power supply 24 V DC, work memory 128 KB, Micro Memory Card

required

General information

Engineering with

● Programming package

STEP 7 V5.5 + SP1 or higher or STEP 7 V5.2 + SP1 or higher

with HSP 218

Supply voltage

Rated value (DC)

● 24 V DC

Yes

permissible range, lower limit (DC) 19.2V

permissible range, upper limit (DC) 28.8V

external protection for power supply lines

(recommendation)

2 A min.

Mains buffering

● Mains/voltage failure stored energy time

5ms

● Repeat rate, min.

1s

Input current

Current consumption (rated value) 650mA

Current consumption (in no-load operation), typ. 140mA

6AG1314-1AG14-7AB0 Subject to change without notice

Page 1/

Summary of content (9 pages)

PAGE 1
Data sheet 6AG1314-1AG14-7AB0 SIPLUS S7-300 CPU 314 -25...+70 °C with conformal coating based on 6ES7314-1AG14-0AB0 . Central processing unit with MPI, Integr. power supply 24 V DC, work memory 128 KB, Micro Memory Card required General information Engineering with ● Programming package STEP 7 V5.5 + SP1 or higher or STEP 7 V5.2 + SP1 or higher with HSP 218 Supply voltage Rated value (DC) ● 24 V DC Yes permissible range, lower limit (DC) 19.2 V permissible range, upper limit (DC) 28.
PAGE 2
Inrush current, typ. 3.5 A I²t 1 A²·s Power loss Power loss, typ. 4W Memory Work memory ● integrated 128 kbyte ● expandable No ● Size of retentive memory for retentive data blocks 64 kbyte Load memory ● Plug-in (MMC) Yes ● Plug-in (MMC), max. 8 Mbyte ● Data management on MMC (after last programming), min. 10 y Backup ● present Yes; Guaranteed by MMC (maintenance-free) ● without battery Yes; Program and data CPU processing times for bit operations, typ. 0.
PAGE 3
● Number of cyclic interrupt OBs 4; OB 32, 33, 34, 35 ● Number of process alarm OBs 1; OB 40 ● Number of startup OBs 1; OB 100 ● Number of asynchronous error OBs 4; OB 80, 82, 85, 87 ● Number of synchronous error OBs 2; OB 121, 122 Nesting depth ● per priority class 16 ● additional within an error OB 4 Counters, timers and their retentivity S7 counter ● Number 256 Retentivity — adjustable Yes — lower limit 0 — upper limit 255 — preset Z 0 to Z 7 Counting range — lower limit 0 — upp
PAGE 4
● Retentivity available Yes; MB 0 to MB 255 ● Retentivity preset MB 0 to MB 15 ● Number of clock memories 8; 1 memory byte Data blocks ● Retentivity adjustable Yes; via non-retain property on DB ● Retentivity preset Yes Local data ● per priority class, max. 32 kbyte; Max.
PAGE 5
Time of day Clock ● Hardware clock (real-time) Yes ● retentive and synchronizable Yes ● Backup time 6 wk; At 40 °C ambient temperature ● Deviation per day, max. 10 s; Typ.
PAGE 6
● MPI Yes ● PROFIBUS DP master No ● PROFIBUS DP slave No ● Point-to-point connection No MPI ● Transmission rate, max. 187.
PAGE 7
— reserved for PG communication 1 — adjustable for PG communication, min. 1 — adjustable for PG communication, max. 11 ● usable for OP communication 11 — reserved for OP communication 1 — adjustable for OP communication, min. 1 — adjustable for OP communication, max. 11 ● usable for S7 basic communication 8 — reserved for S7 basic communication 0 — adjustable for S7 basic communication, min. 0 — adjustable for S7 basic communication, max.
PAGE 8
● can be read out Yes Standards, approvals, certificates CE mark Yes UL approval Yes; File E239877 RCM (formerly C-TICK) Yes KC approval Yes EAC (formerly Gost-R) Yes Use in hazardous areas ● ATEX Yes Ambient conditions Ambient temperature during operation ● min. -25 °C; = Tmin ● max. 70 °C; = Tmax; 60 °C @ UL/cUL, ATEX and FM use Ambient temperature during storage/transportation ● min. -40 °C ● max.
PAGE 9
— Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04 Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil) Remark — Note regarding classification of environmental conditions acc. to EN 60721, EN 60654-4 and ANSI/ISA-71.