Data Sheet

Data sheet 6AG1315-6FF04-2AB0
SIPLUS S7-300 CPU 315F-2DP -25...+60°C with conformal coating
based on 6ES7315-6FF04-0AB0 . Fail-safe module with MPI Integr.
power supply 24 V DC, Work memory 384 KB, 40 mm width, 2nd
interface DP master/ slave Micro Memory Card required
General information
Engineering with
● Programming package
STEP 7 V5.5 + SP1 or higher or STEP 7 V5.2 + SP1 or higher
with HSP 218 + Distributed Safety
Supply voltage
Rated value (DC)
● 24 V DC
Yes
permissible range, lower limit (DC) 19.2V
permissible range, upper limit (DC) 28.8V
external protection for power supply lines
(recommendation)
2 A min.
Mains buffering
● Mains/voltage failure stored energy time
5ms
● Repeat rate, min.
1s
Input current
Current consumption (rated value) 850mA
Current consumption (in no-load operation), typ. 150mA
6AG1315-6FF04-2AB0 Subject to change without notice
Page 1/
11
09/14/2019 © Copyright Siemens

Summary of content (11 pages)