Data Sheet

Data sheet 6AG1315-6FF04-2AY0
SIPLUS S7-300 CPU 315F-2DP with conformal coating according to
EN 50155 T1 Cat 1 Cl A/ B based on 6ES7315-6FF04-0ab0 . Fail-
safe module with MPI Integr. power supply 24 V DC, Work memory
384 KB, 40 mm width, 2nd interface DP master/ slave Micro Memory
Card required
General information
Engineering with
● Programming package
STEP 7 V5.5 + SP1 or higher or STEP 7 V5.2 + SP1 or higher
with HSP 218 + Distributed Safety
Supply voltage
Rated value (DC)
● 24 V DC
Yes; A power supply according to EN 50155 shall be used
permissible range, lower limit (DC) 19.2V
permissible range, upper limit (DC) 28.8V
external protection for power supply lines
(recommendation)
2 A min.
Mains buffering
● Mains/voltage failure stored energy time
5ms
● Repeat rate, min.
1s
Input current
Current consumption (rated value) 850mA
Current consumption (in no-load operation), typ. 150mA
6AG1315-6FF04-2AY0 Subject to change without notice
Page 1/
11
09/16/2019 © Copyright Siemens

Summary of content (11 pages)