Data Sheet

ManualsBrandsSIEMENS ManualsSiemens PLCs6AG1321-1BH02-2AA0 PLC input card

Data sheet 6AG1321-1BH02-2AA0

SIPLUS S7-300 SM321 - 20-POLE -40 ... +70°C with conformal

coating conformity with EN50155 T1 KAT 1 KL A/B based on

6ES7321-1BH02-0AA0. DIGITAL INPUT OPTIC. ISOLATED 16 DI,

24V DC, 1 X 20-POLE

Supply voltage

Load voltage L+

● Rated value (DC)

24V

● permissible range, lower limit (DC)

20.4V

● permissible range, upper limit (DC)

28.8V

Input current

from backplane bus 5 V DC, max. 10mA

Power loss

Power loss, typ. 3.5W

Digital inputs

Number of digital inputs 16

Input characteristic curve in accordance with IEC

61131, type 1

Yes

Number of simultaneously controllable inputs

horizontal installation

— up to 40 °C, max.

— up to 60 °C, max.

16; 16 @ > 60 °C

vertical installation

6AG1321-1BH02-2AA0 Subject to change without notice

Page 1/

Summary of content (4 pages)

PAGE 1
Data sheet 6AG1321-1BH02-2AA0 SIPLUS S7-300 SM321 - 20-POLE -40 ... +70°C with conformal coating conformity with EN50155 T1 KAT 1 KL A/B based on 6ES7321-1BH02-0AA0. DIGITAL INPUT OPTIC. ISOLATED 16 DI, 24V DC, 1 X 20-POLE Supply voltage Load voltage L+ ● Rated value (DC) 24 V ● permissible range, lower limit (DC) 20.4 V ● permissible range, upper limit (DC) 28.8 V Input current from backplane bus 5 V DC, max. 10 mA Power loss Power loss, typ. 3.
PAGE 2
— up to 40 °C, max. 16 Input voltage ● Type of input voltage DC ● Rated value (DC) 24 V ● for signal "0" -30 to +5V ● for signal "1" 13 to 30V Input current ● for signal "1", typ. 7 mA Input delay (for rated value of input voltage) for standard inputs — parameterizable No — at "0" to "1", min. 1.2 ms — at "0" to "1", max. 4.8 ms — at "1" to "0", min. 1.2 ms — at "1" to "0", max. 4.8 ms Cable length ● shielded, max. 1 000 m ● unshielded, max.
PAGE 3
Isolation Isolation tested with 500 V DC Standards, approvals, certificates CE mark Yes UL approval Yes; File E239877 RCM (formerly C-TICK) Yes KC approval Yes EAC (formerly Gost-R) Yes Use in hazardous areas ● ATEX Yes Railway application ● EN 50155 Yes; Sections 4, 5 and 12; no further agreements apply; T1, Category 1, Class A/B, EN 50155:2007 Ambient conditions Ambient temperature during operation ● min. -40 °C; = Tmin ● max.
PAGE 4
— to mechanically active substances according to EN 60721-3-5 Yes; Class 5S3 incl. sand, dust; * Use on ships/at sea — to biologically active substances according to EN 60721-3-6 Yes; Class 6B2 mold and fungal spores (excluding fauna); Class 6B3 on request — to chemically active substances according to EN 60721-3-6 Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-252 (severity degree 3); * — to mechanically active substances according to EN 60721-3-6 Yes; Class 6S3 incl.